EasyManua.ls Logo

Meade LightBridge - Battery Safety Instructions; Mirror Protection Warning

Meade LightBridge
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Telescope Features ...................................................... 8
Assembly ........................................................................ 5
Assemble the Base .................................................. 5
Assemble the Tube .................................................. 6
Insert Eyepiece, Attach Red Dot Finder .................. 7
Collimating the Optical System ................................ 8
Align the deluxe Red Dot Finder ..............................11
Using a Dobsonian Telescope ..................................11
Calculate Magnification ............................................12
Observing ......................................................................12
Some Tips ................................................................15
Care of the Optics ....................................................15
Meade Customer Service ..............................................16
Specifications ................................................................17
Optional Accessories......................................................19
Appendix A: Altitude Adjustment Knobs ........................21
CONTENTS
WARNING!
Never leave the primary mirror uncov-
ered during the daytime unless using
the telescope to view terrestrial objects.
® The name "Meade" and the Meade logo are trademarks
registered with the U.S. Patent and Trademark Office and in
principal countries throughout the world. "LightBridge " is a
trademark of Meade Instruments Corporation.
© 2006 Meade Instruments Corporation.
BATTERY SAFETY INSTRUCTIONS:
Always purchase the correct size and grade of
battery: 4 x “AA-type” Alkaline batteries (ANSI
15A, 15AC/IEC LR6).
Always replace the whole set of batteries at one
time, taking care not to mix old and new ones, or
batteries of different types.
Clean the battery contacts and also those of the
device prior to battery installation.
Ensure the batteries are installed correctly with
regard to polarity (+ and -).
Remove batteries from equipment which is not to
be used for an extended period of time.
Remove used batteries promptly.
Never attempt to recharge primary batteries as this
may cause leakage, fire, or explosion.
Never short-circuit batteries as this may lead to
high temperatures, leakage, or explosion.
Never heat batteries in order to revive them.
Remember to switch off devices after use.
Keep batteries out of the reach of children; small
batteries may be ingested.
Seek medical advice immediately if a battery has
been swallowed.
Caution: If batteries or parts are
swallowed, see a doctor immediately.

Related product manuals