To Next Page
M
mcconnellyvonneJul 30, 2025
What to do if Mec Boom Lifts machine functions will not operate?
- BBrianna DavisJul 30, 2025
If the Mec Boom Lift machine functions are not working, several factors could be at play. First, ensure an adequate fuel supply and the correct fuel blend for the weather conditions. Check that the battery is properly connected and fully charged. See if a circuit breaker has tripped. Confirm that the function toggle switch or the Enable Switch is activated and the Selector Key Switch is in the correct position. Also, ensure both Emergency Stop Switches are reset. Check whether the hydraulic fluid level is low, and look for any obvious fluid leaks or damaged components. Inspect for disconnected, broken, or loose wires.
General
