Mecatronic ASR 680 - User Manual

Questions and Answers

C
Caroline OlsenAug 15, 2025
What to do if my Mecatronic ASR 680 Antenna shows error satellite not found?
- D
  Dr. Sarah Hernandez DDSAug 15, 2025
  If your Mecatronic Antenna displays an error indicating that the satellite cannot be found, this could be due to obstacles like trees, metal walls, or buildings blocking the signal. Try moving the vehicle to an area free from obstructions, ensuring the South direction is clear. Also, check and tighten the connection from the box to the LNB. If the issue persists, you may be outside the satellite footprint; ensure you've followed the setup instructions, or wait until you are in a more central coverage area.
I
Ivan BrewerAug 18, 2025
Why my Mecatronic ASR 680 satellite dish cannot be opened?
- J
  Joshua PerryAug 18, 2025
  If your Mecatronic Antenna satellite dish won't open, several factors could be at play. First, check the power supply and fuse to ensure the dish is receiving power. Second, make sure there are no obstructions physically blocking the dish's movement. Finally, the dish will not open if the vehicle is moving or the engine is running; ensure the vehicle is stationary and the engine is off. Also, verify all connections are secure.
J
Jennifer MooreAug 21, 2025
What to do if Mecatronic ASR 680 Antenna satellite dish loses the signal?
- C
  Carl WilliamsAug 21, 2025
  If your Mecatronic Antenna satellite dish keeps losing signal, check all F connections at the box, satellite dish, and decoder to ensure they are tight. Also, strong storms or wind can disrupt the signal; wait until the weather improves.
J
John BradyAug 25, 2025
Why Mecatronic ASR 680 shows error insufficient power supply?
- K
  Kathy RayAug 26, 2025
  If your Mecatronic Antenna shows an error indicating insufficient power supply, it means the battery is too low to properly operate the system. Charge the battery to resolve this issue.
J
Joshua GreenAug 28, 2025
How to fix RF cable error on Mecatronic ASR 680?
- H
  Heather JamesAug 28, 2025
  If you're encountering an RF cable error with your Mecatronic Antenna, start by checking the satellite cable connections to ensure they are secure. Also, verify the supply voltage and inspect the LNB.
N
Nancy HoffmanAug 31, 2025
What causes error unstable power supply on Mecatronic ASR 680?
- S
  Samuel StanleyAug 31, 2025
  If your Mecatronic Antenna displays an error indicating an unstable power supply, the cause may be a faulty battery or a non-stabilized power supply. Turn off any current generators and have the battery checked.
E
Eugene RogersSep 3, 2025
What to do for Mecatronic ASR 680 Antenna error rotation maximum stress?
- J
  jennifer96Sep 3, 2025
  If your Mecatronic Antenna displays a 'rotation maximum stress' error, it means that there are obstacles such as trees, ice, or snow interfering with the satellite dish's rotation. Remove any obstructions to allow free movement.
L
Luis ClarkSep 6, 2025
How to resolve Mecatronic ASR 680 Antenna error elevation maximum stress?
- L
  Lisa StokesSep 6, 2025
  If your Mecatronic Antenna displays an 'elevation maximum stress' error, it indicates that obstacles are obstructing the satellite dish's elevation. Clear away any trees, ice, or snow that may be causing the obstruction.
D
Donald GomezSep 8, 2025
How to solve rotation error on Mecatronic Antenna?
- G
  gthompsonSep 8, 2025
  If you're experiencing a rotation error with your Mecatronic Antenna, the rotation motor may not be working properly. Check the connections of the grey cable from the satellite dish to the external unit position on the box.
A
angelica49Sep 12, 2025
What to do if I see elevation error on Mecatronic ASR 680 Antenna?
- C
  Cynthia SpearsSep 12, 2025
  If you're encountering an elevation error with your Mecatronic Antenna, the elevation motor might not be functioning correctly. Check the connections of the grey cable from the satellite dish to the external unit position on the box.