Mecatronic ASR 800 - User Manual

Questions and Answers

J
Joshua SmithAug 15, 2025
What to do if my Mecatronic ASR 800 Antenna shows error satellite not found?
- J
  Joyce HoffmanAug 15, 2025
  If your Mecatronic Antenna displays an error indicating that the satellite cannot be found, this could be due to obstacles like trees, metal walls, or buildings blocking the signal. Try moving the vehicle to an area free from obstructions, ensuring the South direction is clear. Also, check and tighten the connection from the box to the LNB. If the issue persists, you may be outside the satellite footprint; ensure you've followed the setup instructions, or wait until you are in a more central coverage area.
A
Andrew HarrisonAug 18, 2025
Why my Mecatronic ASR 800 satellite dish cannot be opened?
- Z
  Zachary FrenchAug 18, 2025
  If your Mecatronic Antenna satellite dish won't open, several factors could be at play. First, check the power supply and fuse to ensure the dish is receiving power. Second, make sure there are no obstructions physically blocking the dish's movement. Finally, the dish will not open if the vehicle is moving or the engine is running; ensure the vehicle is stationary and the engine is off. Also, verify all connections are secure.
L
Laura BryantAug 21, 2025
What to do if Mecatronic Antenna satellite dish loses the signal?
- T
  timothyhudsonAug 21, 2025
  If your Mecatronic Antenna satellite dish keeps losing signal, check all F connections at the box, satellite dish, and decoder to ensure they are tight. Also, strong storms or wind can disrupt the signal; wait until the weather improves.
M
Mr. Christopher CaseyAug 25, 2025
Why Mecatronic Antenna shows error insufficient power supply?
- D
  david88Aug 25, 2025
  If your Mecatronic Antenna shows an error indicating insufficient power supply, it means the battery is too low to properly operate the system. Charge the battery to resolve this issue.
T
Tammy AustinAug 27, 2025
How to fix RF cable error on Mecatronic Antenna?
- M
  Mary KeithAug 27, 2025
  If you're encountering an RF cable error with your Mecatronic Antenna, start by checking the satellite cable connections to ensure they are secure. Also, verify the supply voltage and inspect the LNB.
R
Robert McbrideAug 30, 2025
What causes error unstable power supply on Mecatronic ASR 800?
- E
  Erik DyerAug 30, 2025
  If your Mecatronic Antenna displays an error indicating an unstable power supply, the cause may be a faulty battery or a non-stabilized power supply. Turn off any current generators and have the battery checked.
J
Jessica KerrSep 3, 2025
What to do for Mecatronic ASR 800 Antenna error rotation maximum stress?
- R
  Ruben RobertsonSep 3, 2025
  If your Mecatronic Antenna displays a 'rotation maximum stress' error, it means that there are obstacles such as trees, ice, or snow interfering with the satellite dish's rotation. Remove any obstructions to allow free movement.
J
Jennifer ThomasSep 5, 2025
How to resolve Mecatronic Antenna error elevation maximum stress?
- C
  Christopher ChangSep 5, 2025
  If your Mecatronic Antenna displays an 'elevation maximum stress' error, it indicates that obstacles are obstructing the satellite dish's elevation. Clear away any trees, ice, or snow that may be causing the obstruction.
J
Julia RoblesSep 9, 2025
How to solve rotation error on Mecatronic ASR 800?
- B
  Bobby SmithSep 9, 2025
  If you're experiencing a rotation error with your Mecatronic Antenna, the rotation motor may not be working properly. Check the connections of the grey cable from the satellite dish to the external unit position on the box.
A
Aaron WheelerSep 12, 2025
What to do if I see elevation error on Mecatronic Antenna?
- S
  Shawn NolanSep 12, 2025
  If you're encountering an elevation error with your Mecatronic Antenna, the elevation motor might not be functioning correctly. Check the connections of the grey cable from the satellite dish to the external unit position on the box.