3
www. mechmaxx.com
SAFETY SIGNS
The rating plate on your machine may show symbols. These represent important information about the product or instruc-
tions on its use.
SAFETY SIGNS
FUEL HERE.
RISK OF FIRE. ALLOW
ENGINE TO COOL FOR 1
MINUTE BEFORE
REFUEL LING.
USE UNLEADED PETROL.
UN1203
Check belt tension before
operating chipper. Belt
deflection should be less
than 10mm when 4kg of
pressure is applied to the
belt. The belt will loosen
after the first 1-2 hours
use. You must re-check
and adjust accordingly or
the belts will begin to slip
and wear. For best
performance check for
proper belt tension every
20 hours of use.
4kg.
MAX
10mm
BREATHING IN CARBON MONOXIDE
FUMES CAN KILL YOU!
Engine exhaust fumes contain Carbon Monoxide.
This is a poisonous gas and can kill in minutes.
NEVER use inside a building or in an area with
poor ventilation.
NEVER use inside a confined space, such as but
not limited to a house, garage, vehicle, boat or tent.
ONLY use outside and far away from windows,
doors and vents.
Read the user manual before operating
DO NOT place wood or branches
over 5 inch in diameter into the
in-feeding bin. The blades may get
stuck or jammed.
MAX. 5inch
To Next Page