20
www. mechmaxx.com
MAINTENANCE
MAINTENANCE SCHEDULE
Before attempting any maintenance, be sure that the engine is shut off, the spark plug wire is
removed, and the engine is cool to the touch!
If a part needs replacement, only use parts that meet the manufacturer's specifications. Replace-
ment parts that do not meet specifications may result in a safety hazard or poor operation of the
grinder.
Daily Each Use
Procedure
10 hours 20 hours 40 Hours
Bearing, Shaft-Grease
Belt Tension-Tension
Bolts-Tightness
Engine
Gasoline-Amount
Safety Switch-Operation
Warning Decals-Legible
Tires, Flaps-Condition
Wires, Cables-Condition
Cutter Teeth-Sharpness
See manual
To Next Page
Loading...