MECNOSUD MX Series - Page 40

40 PLANETARY MIXER - MX SERIES Use and maintenance manual Edition 09-2011
Keyboard
Keyboard description:
1)
increments the selected datum.
2)
decrements the selected datum.
3)
to select the timing in automatic mode.
4)
to set the tools rotation speed.
5)
allow selecting the tools preset rotation speeds: 1, 2, 3
or 4. The first three keys are also used to select the phases of a program.
6)
allows selecting between automatic or manual mode.
7)
to select the program to be executed and/or to be modified.
8)
starts a cycle.
9)
stops the machine at any moment.
10)
used to raise the bowl.
11)
used to lower the bowl.
Display
during operation, it displays the time of the phase in progress in count-down or in
count-up, depending on the operation mode.
displays the tools revolutions per minute.
ENGLISH