MecPower Tecway Big Teeth Battle

Questions and Answers

J
Jason McguireAug 3, 2025
What to do if MecPower Tecway Big Teeth Battle have no movement?
- M
  Manuel RollinsAug 4, 2025
  If your MecPower Tecway Arcade Game Machine has no movement, first ensure that the power is on and plugged in. If it still doesn't work, check that the power switch is turned on. Also, inspect the power fuse and replace it if it's burned. If there is no voltage output for the power supply, replace the power supply. Check the main board wire and connect it if there is no power pressure for the main board. If the issue persists, the main board might be damaged and needs replacement.
C
copelandjulieAug 11, 2025
Why is there no music on my MecPower Tecway Big Teeth Battle Arcade Game Machines?
- K
  Karen HernandezAug 11, 2025
  If your MecPower Tecway Arcade Game Machine isn't producing any music, start by adjusting the volume. If that doesn't work, check the volume output wire for any short circuits and connect the wire if needed. Inspect the speaker for damage, and replace it if necessary. If the issue persists, the amplifier or PC board might be damaged, requiring a main board replacement. Also, ensure the audio connection wire is connected correctly and the speakers are turned on.
J
Jason OrozcoAug 18, 2025
What to do if no ticket comes out of MecPower Tecway Arcade Game Machines?
- P
  Patricia BeckerAug 19, 2025
  If your MecPower Tecway Arcade Game Machine is not dispensing tickets, check that there is 12V input for the ticket dispenser, and inspect the power supply voltage and wire. Also, check the drive signal wire. Ensure the ticket wheel is properly put down. If the ticket dispenser terminal is damaged, replace the main board. If the machine is not set for ticket output, adjust the type for ticket out.
J
Jason MarksAug 26, 2025
How to fix 'can not insert coin' issue in MecPower Tecway Big Teeth Battle?
- D
  darin59Aug 26, 2025
  If you can't insert a coin into your MecPower Tecway Arcade Game Machine, first check if it's a fake coin and remove it. If the coin is valid, try adjusting the coin acceptor.