06146-5
9
| USER MANUAL- ENGLISH
» Scroll up hours quickly: press and hold down
button 3.
2. Once the hour is selected, press button 1
again to finalize and move to set the minutes.
» Go down by one minute: press and quickly
release button 2.
» Scroll down minutes quickly: press and hold
down button 2.
» Go up by one minute: press and quickly
release button 3.
» Scroll up minutes quickly: press and hold
down button 3.
3. Once the hours and minutes have been
selected for scheduled event(s), press and
quickly release button 1 to move the next
alarm.
4. Repeat steps one and two through the
remaining five alarms if necessary.
» If you do not need additional alarms, press
and quickly release button 1 through each
10
| USER MANUAL- ENGLISH
Setting the Alarm Tone
You can choose between three
alarm tones or a silent mode. The
silent mode does not allow an
audible alarm to trigger, but still
allows the light to flash during the scheduled
alarms.
1. Press and hold down button 3.
2. To move between alarm tones, while holding
down button 3, press button 1.
remaining alarm to skip them (2-6).
» After you press button 1 after the sixth alarm,
you will return to the main screen.
» If you need to remove alarms, simply go to
the alarm that you would like to remove and
take the hours back until you only see four
To Next Page
Loading...