Need help?Do you have a question about the Med-Mizer ActiveCare-Standard and is the answer not in the manual?
Provides instructions for use of the ActiveCare Bed and warns against operation without reading the manual.
Specifies the intended purpose, environment, load capacity, and user type for the ActiveCare Bed.
Explains warning and caution symbols and provides general safety guidelines for bed usage.
Outlines safety precautions for raising, lowering, and pivoting the bed, focusing on preventing entrapment.
Emphasizes the importance of locking side rails and assist bars to prevent fall hazards.
Warns about using only approved accessories and replacement parts from Med-Mizer to prevent injury.
Provides safety guidelines for cleaning the bed, warning against liquid spills and improper cleaning agents.
Details safety precautions before performing maintenance, such as unplugging the power cord.
Lists key technical specifications of the ActiveCare bed, including dimensions, load capacity, and power requirements.
Describes the physical characteristics of intended users and provides visual guides for bed width compatibility.
Specifies required clearance around the bed, particularly the 6-inch wall clearance for Trendelenburg feature.
Lists available accessories like UD Rails, Mobility Bar, Trapeze, and Battery Backup.
Shows available finish options for headboards and footboards, indicating custom options are available.
Lists the necessary tools for safely unpacking the bed shipped via LTL/Commercial.
Provides step-by-step instructions for removing packaging materials and straps from the bed.
Lists the tools needed for assembling the ActiveCare bed.
Instructs to begin assembly with the bed frame resting on installation blocks.
Guides on identifying the head and foot weldments based on logo and wall bumpers.
Instructs on installing high/low weldments to the frame using provided bolts and nuts, ensuring correct orientation.
Details how to connect the motor extension cable to the actuator and secure it with zip ties.
Guides on attaching the head/foot board to the weldment by sliding board mount brackets into channel brackets.
Lists the necessary tools for performing pivot alignment on the bed.
Instructs on finding the adjustment bracket and bolts behind the headboard for pivot alignment.
Details loosening and retightening pivot bolts to straighten the bed sections, showing correct and incorrect alignment.
Guides on raising bed sections and locating mattress straps for installation.
Explains placing the mattress and securing straps to the sleep surface, noting the correct orientation for the foot portion.
Details raising the bed and removing bolts to prepare for relocating the actuator for a left turn.
Details installing spacers and fasteners for the actuator, ensuring it pivots freely without overtightening.
Guides on raising the bed, locating the pendant, and identifying its attachment points on the head section.
Describes unscrewing the pendant clip and moving it to the opposite side, ensuring the cord is not wrapped around the actuator.
Details removing the wire clamp and unplugging the pendant using a 5/16 socket.
Guides on removing the pivot nut and mounting plate, then reattaching after routing the pendant cord.
Explains using cable ties to manage slack and prevent pinching, and plugging the pendant back in.
Explains the functions of each button on the hand pendant control, including special notes for chair position.
Instructions for safely transporting the bed and cleaning its frame using disinfecting wipes.
Details specific checks for frame, electrical enclosures, fasteners, actuators, and power cords during maintenance.
Provides solutions for common issues found during maintenance, recommending contact with customer service.
Lists part numbers and descriptions for ordering replacement components for the bed.
Outlines common bed issues like no remote response or beeping, with potential causes and corrections.
Step-by-step guide to reinitialize the control box and the bed's functions using specific pendant button sequences.
Details the warranty periods for different bed components and conditions that may void the warranty.
General| Weight Capacity | 450 lbs |
|---|---|
| Power Requirements | 120 VAC, 60Hz |
| Control Type | Hand Pendant |
| Frame Material | Steel |
| Trendelenburg | Yes |
| Reverse Trendelenburg | Yes |
| Motor Type | DC motor |
To Next Page
