To Next Page
B
Brittany BurchAug 3, 2025
Why my Med-Mizer ActiveCare-Fixed Medical Equipment bed does not respond to the remote control?
- NNathan JenkinsAug 3, 2025
If your Med-Mizer Medical Equipment bed isn't responding to the remote control, here's what you can check: * First, make sure the remote is properly connected by reinstalling it into the female port on the control box. * If that doesn't work, the remote itself might be defective, and you'll need to replace it with all necessary cables. * Also, check for loose actuator connections and ensure all actuators and cabling are securely connected. * Lastly, the control box could be defective, requiring replacement.
General
