Cleaning and Disinfection
27/ 46
5. Prepare several pieces of soft medical gauze, a detergent container, and a
disinfectant container.
8.2 Cleaning
1. Completely immerse a piece of soft medical gauze in the recommended
detergent solution, wring out the gauze, and then use the gauze to wipe the
device surface.
2. Wipe all the surfaces of the device in sequence until all the contaminants are
removed from the device surface.
3. Ensure that all the edges and corners of the device are completely cleaned.
4. Place the handle insertion part under the water faucet to gently flush it.
5. After the cleaning, use a piece of dry medical gauze to remove the residual
detergent solution.
The following tables lists the detergents recommended for the device.
Table 8-1 Recommended detergents
Soapy water (pH value: 7.0~10.5)
WARNING:
Do not use halogenated solvent, petroleum-based solvent, glass cleaner,
acetone, or other irritant detergents.
Be careful not to scratch yourself when cleaning the metal handle insertion
part.
To Next Page
Loading...
