6
Prior to initital use and subsequently once daily, the individual com-
ponents which come in contact with milk must be rinsed and placed in a sauce-
pan of sufficient capacity. Fill the latter with cold water until the components
are well covered, heat it up and allow to boil for 5 minutes.
After draining the water off, the hot items should be spread out on a clean
towel to cool and dry. Instead of boiling, you can put the disassembled parts
in a dishwasher and run a complete standard program.
Each time they have been used, all items (except for the breastpump)
should be washed in lukewarm water containing a gentle clean ing agent and
then rinsed in fresh water. Allow parts to dry in the air on a dry cloth.
To Next Page
Loading...
