8
5. Connect the other end of the tube to the breastpump.
Follow steps 1–5 for the second breastshield.
6. Insert the power connector into the connection socket on the breastpump.
Plug in the mains adapter. UseonlytheoriginalMedelaadapter.Other
adaptersmaydamagethepumporcauseproblemsduringuse.
5 6
7. Set the vacuum regulator to
minimum and switch on the
breastpump. Adjust the va-
cuum to your Maximum Com-
fort Vacuum™. This is the
highest vacuum you can use and
still feel comfortable (different for
every mother). To find your Ma-
ximum Comfort Vacuum incre-
ase vacuum until pumping feels
slightly uncomfortable (not pain-
ful), then decrease slightly.
Researchhasshown that you willpump moreefficiently– meaning
get more milk in less time – when pumping at Maximum Comfort
Vacuum™.
7