To Next Page
R
Rebecca EdwardsAug 17, 2025
What to do if the tubing is clogged in my Medela Medical Equipment?
- JJennifer ThomasAug 17, 2025
If the tubing of your Medela Medical Equipment is clogged, which could be due to the tubing being kinked or clogged for approximately 10 minutes, or if the Thopaz+ detects clotting in the tubing (but not the patient's catheter), follow these steps: 1. Clamp the catheter. 2. Clamp the tubing. 3. Switch to Standby. 4. Replace the tubing. 5. Continue with “On”. 6. Unclamp the catheter.
General
