To Next Page
N
Nicholas JacksonSep 8, 2025
What to do if Medela Thopaz Medical Equipment temperature is too high?
- DDavid RodriguezSep 8, 2025
If the Medela Medical Equipment displays 'Temperature too high', prepare a backup device.
What to do if Medela Thopaz Medical Equipment temperature is too high?
If the Medela Medical Equipment displays 'Temperature too high', prepare a backup device.
What to do if Medela Thopaz canister is full?
If your Medela Medical Equipment displays 'Canister full', replace the canister.
What to do if Medela Thopaz Medical Equipment filter is clogged?
If the Medela Medical Equipment displays 'Filter clogged', replace the canister and continue with 'on'.
What to do if Medela Medical Equipment indicates leakage?
If the Medela Medical Equipment displays 'Leakage', check the patient status and the system for leaks, then continue with 'OK'.
What to do if Medela Thopaz has leakage?
If you notice leakage in the Medela Medical Equipment, check the patient status and inspect the system for leaks. Then, continue with 'OK'.
How to unclog Medela Thopaz system?
If the Medela Medical Equipment system is clogged, check that the tubing is clear and not twisted. Also, replace the canister.
How to resolve an internal error on Medela Thopaz Medical Equipment?
To address an internal error on your Medela Medical Equipment, switch the Thopaz off and on again.
What to do if Medela Thopaz Medical Equipment USB connection is not permitted?
If the Medela Medical Equipment displays 'USB connection not permitted', unplug the USB cable.
What to do if Medela Thopaz overheated?
If the Medela Medical Equipment overheats, replace the Thopaz device.
How to troubleshoot Medela Thopaz selftest failure?
If the Medela Medical Equipment displays 'Selftest failed', snap the canister out and then back in again.
General| Brand | Medela |
|---|---|
| Model | Thopaz |
| Category | Medical Equipment |
| Language | English |
Details critical warnings and cautions for safe device operation.
Instructions for checking the completeness and condition of the delivered Thopaz system.
Guides the user through the initial startup and first-time setup.
Covers essential checks before operation and how to connect the tubing.
Details how to attach standard and 2L canisters to the device.
Guides the user through powering on the device and initial patient setup.
Explains how to perform a functional check and start therapy.
Introduces the troubleshooting section, explaining warnings, alarms, and errors.
Lists common error codes and their corresponding troubleshooting steps.
