What to do if Medela Thopaz Medical Equipment system is clogged?
If your Medela Medical Equipment system is clogged, check that the tubing is clear and not twisted. You may also need to replace the canister.
What to do if Medela Thopaz overheated?
If the Medela Medical Equipment overheats, replace the Thopaz device.
How to exit standby mode on Medela Medical Equipment?
If the Medela Medical Equipment enters standby mode, switch the Thopaz device on or off.
How to fix Medela Thopaz when battery is low?
If the Medela Medical Equipment indicates 'Battery low', you should charge the battery by connecting the Thopaz to the mains.
What to do if Medela Medical Equipment battery is empty?
If your Medela Medical Equipment displays 'Battery empty', charge the battery by connecting the Thopaz device to the mains.
How to unclog Medela Thopaz system?
If the Medela Medical Equipment system is clogged, check that the tubing is clear and not twisted. Also, replace the canister.
What to do if Medela Thopaz has leakage?
If you notice leakage in the Medela Medical Equipment, check the patient status and inspect the system for leaks. Then, continue with 'OK'.
What to do if Medela Medical Equipment indicates leakage?
If the Medela Medical Equipment displays 'Leakage', check the patient status and the system for leaks, then continue with 'OK'.
What to do if Medela Thopaz Medical Equipment filter is clogged?
If the Medela Medical Equipment displays 'Filter clogged', replace the canister and continue with 'on'.
What to do if Medela Thopaz canister is full?
If your Medela Medical Equipment displays 'Canister full', replace the canister.
Details critical warnings and cautions for safe device operation.
Instructions for checking the completeness and condition of the delivered Thopaz system.
Guides the user through the initial startup and first-time setup.
Covers essential checks before operation and how to connect the tubing.
Details how to attach standard and 2L canisters to the device.
Guides the user through powering on the device and initial patient setup.
Explains how to perform a functional check and start therapy.
Introduces the troubleshooting section, explaining warnings, alarms, and errors.
Lists common error codes and their corresponding troubleshooting steps.
General| Brand | Medela |
|---|---|
| Model | Thopaz |
| Category | Medical Equipment |
| Language | English |
To Next Page
