EMC
Technical documentation | 46
WARNINGS
Thopaz should not be used adjacent to or stacked with other equipment. If adjacent or
stacked use is necessary, Thopaz should be observed to verify normal operation in the
configuration in which it will be used.
Electromagnetic compatibility (EMC, IEC 60601-1-2:2007, Table 1)
Electromagnetic emissions
Thopaz is intended for use in the electromagnetic environment specified below. The
customer or the user of Thopaz should assure that they are used in such environment.
Emission Tests Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1 Thopaz uses RF energy only for its internal
function. Therefore, its RF emissions are very
low and are not likely to cause any interference
with nearby electronic equipment.
RF emissions
CISPR 11
Class B Thopaz is suitable for use in all estab
lishments,
including domestic establishments and those
directly connected to the public low-voltage
power supply network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctutions /
flicker emissions
IEC 61000-3-3
Complies
To Next Page
Loading...
