29 | Changing settings
11 Changing settings
WARNINGS
The settings may only be changed by the physician or on medical orders.
Change settings
1.1 Press [
] and [ ]
simultaneously. The
settings are displayed.
Press simultaneously
Important: Thopaz must be in Standby mode
1.
Selection
max. -10 kPa /-100 cmH
2
O
kPa / cmH
2
O* / mbar / mmHg
mL / min / L / min
off / on
no / yes
2.1 Set the desired parameter
by pressing [
] or [ ]
and confirm with «OK».
2.2 Change the desired para-
meter by pressing [
] or
[ ] and confirm with «OK».
2.3 Press «back» to reactivate
the Standby mode.
The setting is changed for
the actual therapy.
2.
* cmH
2
O is not a SI unit according
to EU Directive 80/181/EEC.
Change pressure
To Next Page
Loading...
