DD402_Setup_G08_1103 03
Loosen wing nut on the clamp,which is on side arm(L1).
Insert the drum module to the clamp .
Tighten the wing screw on the clamp .
Attaching module
1
2
3
Pedal /Bass drum pedal
Drum Pad
Cymbal Pad
Drum Module
Bass drum pedal PedalHi-Hat
Place the pedal on the floor on your left side.
Place the bass drum pedal on the floor .
Please connect the clearly marked cables from the pads to the
correct inputs on the drum module, and you are ready to play!
in the center of rack
1
3
1
2
3
,
Side Arm(L1)
To
control
Hi-Hat
To Kick
Hi-HatTo
Tom 2To
Tom 3To
SnareTo
Tom 1To
2
2
1
To Crash
RideTo