Store and Recall Patches
Press and hold the 2nd button for another 2 seconds
to enter the storage function; all LED indicators will
flash from 1 to 4 in a fast speed.
You can then release the button. The LED indicator
of this button will be lighted for the final one second,
then the whole action will stop; your own setting has
already been stored into the chosen patch.
Finally, it returns to the normal mode automatically:
Recalling the Saved Memories
If you want to recall the patches that you have saved,
you must turn the DELAY MODE knob to the M
position:
At this time, the LED indicator of the latest stored
patch will be lighted automatically.
For example, if you want to recall patch 1, just press
the 1st button:
When the DELAY MODE knob points to the M
position, all knobs will be inactivated.
16
To Next Page
Loading...