Memory/Percussion
Press the [MEMORY/PERC.] button to switch the
buttons [M1] - [M5] function between memory function to
percussion function. The default function is memory when
power is turned on.
Memory
Percussion
There are 5 memories (M1-M5).
1. While holding the [STORE] button, press one of the
MEMORY buttons: [M1] - [M5] to register the panel
settings. The new settings will replace the previous
memory data. The settings include the number of voice,
the number of style, tempo, beat value, sustain effect,
etc.
2. Press one of the MEMORY buttons: [M1] - [M5] to
recall the panel settings.
Note:
The stored settings can not be recalled when the One
Touch Setting function is on.
The stored settings will be returned to the default settings
after you turned off the power.
There are 5 percussion pads:Bass drum, snare drum,
hi-hat open, hi-hat close, and high tom-tom.
1. Press the [MEMORY/PERC.] button to enter the
percussion function. The LCD will display PERC.
2. Press the [PAD] buttons to play the percussion sounds.
13