Do you have a question about the Medha MEP 660 and is the answer not in the manual?
Brand | Medha |
---|---|
Model | MEP 660 |
Category | Control Systems |
Language | English |
Troubleshooting for Low Water Level fault (Code 1001), including restrictions and isolation.
Troubleshooting for Engine Over Speed fault (Code 1002), detailing restrictions and isolation.
Troubleshooting for Exciter Drive Short Circuit Fault (Code 1003), including probable causes and isolation.
Troubleshooting for LLOB trip fault (Code 1004) related to the reset plunger.
Troubleshooting for LLOB Trip fault (Code 1005), potentially related to driver actions.
Troubleshooting for HOT ENGINE fault (Code 1006) preventing power up.
Troubleshooting for Power Circuit Ground Fault (Code 1007), covering potential causes and isolation.
Troubleshooting for Control Circuit Ground Fault (Code 1008), including probable causes and isolation.
Troubleshooting for Locked Axle on Wheel 1 fault (Code 1009), focusing on sensor and mechanical checks.
Troubleshooting for Locked Axle on Wheel 2 fault (Code 1010), involving speed sensor and mechanical checks.
Troubleshooting for Locked Axle on Wheel 3 fault (Code 1011), addressing speed sensor and mechanical issues.
Troubleshooting for Locked Axle on Wheel 4 fault (Code 1012), focusing on speed sensor and mechanical checks.
Troubleshooting for Locked Axle on Wheel 5 fault (Code 1013), including speed sensor and mechanical aspects.
Troubleshooting for Locked Axle on Wheel 6 fault (Code 1014), covering speed sensor and mechanical checks.
Troubleshooting for Loco over speed fault (Code 1015), requiring master controller to be set to IDLE.
Troubleshooting for Alternator Field Circuit Open fault (Code 1016), involving exciter and wiring checks.
Troubleshooting for Exciter Field Circuit Open/Short fault (Code 1017), detailing wiring and sensor checks.
Troubleshooting for GF Stuck Open fault (Code 1018), focusing on contactor operation and wiring.
Troubleshooting for CEB Breaker OFF fault (Code 1019), checking breaker status and wiring.
Troubleshooting for Rectifier Diodes HOT fault (Code 1020), involving blower and thermostat checks.
Troubleshooting for Rectifier Blower Failed fault (Code 1021), checking breaker and blower operation.
Troubleshooting for Wrong Command fault (Code 1022), related to train line signals.
Troubleshooting for BKT Stuck in Braking fault (Code 1023), checking air pressure and magnet valves.
Troubleshooting for BKT-M Aux Contact Open fault (Code 1024), focusing on auxiliary contacts and wiring.
Troubleshooting for Alternator Output Voltage High fault (Code 1025), involving voltage sensors and wiring.
Troubleshooting for Alternator Output Current High fault (Code 1026) during Dynamic Braking.
Troubleshooting for Alternator Field Over Current fault (Code 1027), checking exciter and FCP.
Troubleshooting for Exciter Field Over Current fault (Code 1028), involving FCP, rectifier, and sensors.
Troubleshooting for Cranking Contactor Stuck Closed fault (Code 1029), checking contactors and wiring.
Troubleshooting for SLBR/SLBC Contactor Stuck Closed fault (Code 1030), checking relays and wiring.
Troubleshooting for Wheel Number 1 Continuously Sliding fault (Code 1031), involving brake binding and speed sensors.
Troubleshooting for Wheel Number 2 Continuously Sliding fault (Code 1032), checking brake binding and speed sensors.
Troubleshooting for Wheel Number 3 Continuously Sliding fault (Code 1033), involving brake binding and speed sensors.
Troubleshooting for Wheel Number 4 Continuously Sliding fault (Code 1034), checking brake binding and speed sensors.
Troubleshooting for Wheel Number 5 Continuously Sliding fault (Code 1035), involving brake binding and speed sensors.
Troubleshooting for Wheel Number 6 Continuously Sliding fault (Code 1036), checking brake binding and speed sensors.
Troubleshooting for Traction Motor 1 High Current While Motoring fault (Code 1037).
Troubleshooting for Traction Motor 2 High Current While Motoring fault (Code 1038).
Troubleshooting for Traction Motor 3 High Current While Motoring fault (Code 1039).
Troubleshooting for Traction Motor 4 High Current While Motoring fault (Code 1040).
Troubleshooting for Traction Motor 5 High Current While Motoring fault (Code 1041).
Troubleshooting for Traction Motor 6 High Current While Motoring fault (Code 1042).
Troubleshooting for Traction Motor 1 High Current While in Dynamic Brake fault (Code 1043).
Troubleshooting for Traction Motor 2 High Current While in Dynamic Brake fault (Code 1044).
Troubleshooting for Traction Motor 3 High Current While in Dynamic Brake fault (Code 1045).
Troubleshooting for Traction Motor 4 High Current While in Dynamic Brake fault (Code 1046).
Troubleshooting for Traction Motor 5 High Current While in Dynamic Brake fault (Code 1047).
Troubleshooting for Traction Motor 6 High Current While in Dynamic Brake fault (Code 1048).
Troubleshooting for High Current in Cutout Motor 1 fault (Code 1049), related to power circuit.
Troubleshooting for High Current in Cutout Motor 2 fault (Code 1050), related to power circuit.
Troubleshooting for High Current in Cutout Motor 3 fault (Code 1051), related to power circuit.
Troubleshooting for High Current in Cutout Motor 4 fault (Code 1052), related to power circuit.
Troubleshooting for High Current in Cutout Motor 5 fault (Code 1053), related to power circuit.
Troubleshooting for High Current in Cutout Motor 6 fault (Code 1054), related to power circuit.
Troubleshooting for Traction Motor 1 Circuit Open fault (Code 1055), checking contactors and wiring.
Troubleshooting for Traction Motor 2 Circuit Open fault (Code 1056), checking contactors and wiring.
Troubleshooting for Traction Motor 3 Circuit Open fault (Code 1057), involving contactors and wiring checks.
Troubleshooting for Traction Motor 4 Circuit Open fault (Code 1058), checking contactors and wiring.
Troubleshooting for Traction Motor 5 Circuit Open fault (Code 1059), checking contactors and wiring.
Troubleshooting for Traction Motor 6 Circuit Open fault (Code 1060), involving contactors and wiring.
Troubleshooting for Battery Voltage LOW warning (Code 1061), checking battery and charging system.
Troubleshooting for Battery Voltage HIGH fault (Code 1062), checking charging voltage and sensor.
Troubleshooting for Aux. Gen. Field drive short circuit fault (Code 1063), checking MPWM2 card and sensors.
Troubleshooting for Low Lube Oil Pressure fault (Code 1064), checking engine shutdown and sensor.
Troubleshooting for REV Stuck in Reverse fault (Code 1068), checking air pressure and reverser operation.
Troubleshooting for REV-F Aux. Contact Open fault (Code 1069), checking auxiliary contacts and wiring.
Troubleshooting for REV Stuck in Forward fault (Code 1070), checking reverser operation and wiring.
Troubleshooting for Wrong Command fault (Code 1072), related to train line signals during braking.
Troubleshooting for Fire Alarm ON fault (Code 1073), checking fire alert system and input card.
Troubleshooting for Field Shunting Relay Stuck Closed fault (Code 1074).
Troubleshooting for Field Shunting Relay Circuit Open fault (Code 1075).
Troubleshooting for Loose Contact in S1 circuit fault (Code 1076).
Troubleshooting for Loose Contact in S21 circuit fault (Code 1077).
Troubleshooting for Loose Contact in S31 circuit fault (Code 1078).
Troubleshooting for Loose Contact in P1 circuit fault (Code 1079).
Troubleshooting for Loose Contact in P21 circuit fault (Code 1080).
Troubleshooting for Loose Contact in P31 circuit fault (Code 1081).
Troubleshooting for Loose Contact in P2 circuit fault (Code 1082).
Troubleshooting for Loose Contact in P22 circuit fault (Code 1083).
Troubleshooting for Loose Contact in P32 circuit fault (Code 1084).
Troubleshooting for P1 stuck closed fault (Code 1085), related to contactor and wiring.
Troubleshooting for P21 stuck closed fault (Code 1086), involving contactor, wiring, and card checks.
Troubleshooting for P31 stuck closed fault (Code 1087), checking contactor, wiring, and card.
Troubleshooting for P2 stuck closed fault (Code 1088), involving contactor, wiring, and card.
Troubleshooting for P22 stuck closed fault (Code 1089), checking contactor, wiring, and card.
Troubleshooting for P32 stuck closed fault (Code 1090), involving contactor, wiring, and card checks.
Troubleshooting for S1 stuck closed fault (Code 1091), checking contactor, wiring, and card.
Troubleshooting for S21 stuck closed fault (Code 1092), involving contactor, wiring, and card.
Troubleshooting for S31 stuck closed fault (Code 1093), checking contactor, wiring, and card.
Troubleshooting for Field Shunting Contactor Circuit Open fault (Code 1094).
Troubleshooting for Field Shunting Contactor Circuit Open fault (Code 1095).
Troubleshooting for Field Shunting Contactor Circuit Open fault (Code 1096).
Troubleshooting for Traction Alternator output short circuit fault (Code 1097).
Troubleshooting for P2 Stuck Closed without Aux Contact ON fault (Code 1102).
Troubleshooting for P32 Stuck Closed without Aux Contact ON fault (Code 1103).
Troubleshooting for P22 Stuck Closed without Aux Contact ON fault (Code 1104).
Troubleshooting for P1 Stuck Closed without Aux Contact ON fault (Code 1105).
Troubleshooting for P31 Stuck Closed without Aux Contact ON fault (Code 1106).
Troubleshooting for P21 Stuck Closed without Aux Contact ON fault (Code 1107).
Troubleshooting for P22 Stuck Closed without Aux Contact ON fault (Code 1108).
Troubleshooting for P1 Stuck Closed without Aux Contact ON fault (Code 1109).
Troubleshooting for P31 Stuck Closed without Aux Contact ON fault (Code 1110).
Troubleshooting for P2 Stuck Closed without Aux Contact ON fault (Code 1111).
Troubleshooting for P21 Stuck Closed without Aux Contact ON fault (Code 1112).
Troubleshooting for P32 Stuck Closed without Aux Contact ON fault (Code 1113).
Troubleshooting for P1 stuck open fault (Code 1127), related to contactor operation and wiring.
Troubleshooting for P21 stuck open fault (Code 1128), checking contactor, wiring, and card.
Troubleshooting for P31 stuck open fault (Code 1129), involving contactor, wiring, and card.
Troubleshooting for P32 stuck open fault (Code 1130), checking contactor, wiring, and card.
Troubleshooting for EXPR circuit open fault (Code 1133), checking relay, wiring, and output card.
Troubleshooting for AGPR circuit open fault (Code 1134), checking relay, wiring, and input card.
Troubleshooting for Wrong Command fault (Code 1135), related to train line signals.
Troubleshooting for BKT Stuck in Motoring fault (Code 1136), checking air pressure and magnet valves.
Troubleshooting for BKT-B Aux Contact Open fault (Code 1137), focusing on auxiliary contacts and wiring.
Troubleshooting for Direction reversal attempted at High Speed fault (Code 1138).
Troubleshooting for Invalid Notch Command fault (Code 1139), related to train line signals.
Troubleshooting for Cranking Contactor Stuck Open fault (Code 1140), checking contactors and wiring.
Troubleshooting for Aux. Gen. Output Voltage High fault (Code 1141), checking voltage sensor and cards.
Troubleshooting for Battery Charging Current High fault (Code 1142), checking battery and charging current.
Troubleshooting for Aux. Gen. Output Over current fault (Code 1143), checking current sensors and cards.
Troubleshooting for Aux. Gen. Field Over Current fault (Code 1144), checking voltage sensor and wiring.
Troubleshooting for Auxiliary Generator Output Circuit Open fault (Code 1145).
Troubleshooting for Aux. Gen. Field Circuit Open or Short fault (Code 1146).
Troubleshooting for VCD Circuit Open fault (Code 1150), checking relay, wiring, and cards.
Troubleshooting for VCD Applied Penalty Brake fault (Code 1153), involving master controller and brake release.
Troubleshooting for MCU EEPROM Faulty fault (Code 1154).
Troubleshooting for VCD Stuck Closed fault (Code 1155), related to controller operation.
Troubleshooting for DEB Engine Breaker Off fault (Code 1156), checking breaker and wiring.
Troubleshooting for DEB Car body Breaker Off fault (Code 1157), checking breaker and wiring.
Troubleshooting for BKT Contact Open fault (Code 1165) during Dynamic Braking.
Troubleshooting for BKT Contact Open fault (Code 1166) during Dynamic Braking.
Troubleshooting for BKT Contact Open fault (Code 1167) during Dynamic Braking.
Troubleshooting for BKT Contact Open fault (Code 1169) during Dynamic Braking.
Troubleshooting for BKT Contact Open fault (Code 1170) during Dynamic Braking.
Troubleshooting for Alternator Voltage Sensor Faulty fault (Code 1173).
Troubleshooting for EP Analogue DB Power Supply FAULTY fault (Code 1174).
Troubleshooting for Alternator Field Current Sensor Faulty fault (Code 1175).
Troubleshooting for Exciter Field Current Sensor Faulty fault (Code 1176).
Troubleshooting for Traction Alternator Current Sensor Faulty fault (Code 1183).
Troubleshooting for Frequency DB Power Supply FAULTY fault (Code 1184).
Troubleshooting for WS EEPROM Faulty fault (Code 1185).
Troubleshooting for WS EEPROM Write Error at Power Off fault (Code 1186).
Troubleshooting for Traction motor 1 current sensor faulty fault (Code 1189).
Troubleshooting for Traction motor 2 current sensor faulty fault (Code 1190).
Troubleshooting for Traction motor 3 current sensor faulty fault (Code 1191).
Troubleshooting for Traction motor 4 current sensor faulty fault (Code 1192).
Troubleshooting for Traction motor 5 current sensor faulty fault (Code 1193).
Troubleshooting for Traction motor 6 current sensor faulty fault (Code 1194).
Troubleshooting for S1 Auxiliary Contact Stuck Open fault (Code 1195).
Troubleshooting for S21 Auxiliary Contact Stuck Open fault (Code 1196).
Troubleshooting for S31 Auxiliary Contact Stuck Open fault (Code 1197).
Troubleshooting for P1 Auxiliary Contact Stuck Open fault (Code 1198).
Troubleshooting for P21 Auxiliary Contact Stuck Open fault (Code 1199).
Troubleshooting for P2 Auxiliary Contact Stuck Open fault (Code 1200).
Troubleshooting for P21 Auxiliary Contact Stuck Open fault (Code 1201).
Troubleshooting for P22 Auxiliary Contact Stuck Open fault (Code 1202).
Troubleshooting for P32 Auxiliary Contact Stuck Open fault (Code 1203).
Troubleshooting for EXPR Stuck Closed fault (Code 1204), checking relay and output card.
Troubleshooting for AGPR Stuck Closed fault (Code 1205), checking relay, wiring, and input card.
Troubleshooting for GF Stuck Closed fault (Code 1206), checking contactor, wiring, and output cards.
Troubleshooting for Engine Shut Down due to OST Tripping fault (Code 1210).
Troubleshooting for GF Auxiliary Contact 1 OPEN FAULT (Code 1208).
Troubleshooting for GF Auxiliary Contact 2 OPEN FAULT (Code 1209).
Troubleshooting for Communication with Electronic Governor Faulty fault (Code 1211).
Troubleshooting for AUX EEPROM Faulty fault (Code 1212).
Troubleshooting for RTC Fault Occurred @ Power ON fault (Code 1213).
Troubleshooting for Aux. Analogue DB Power Supply FAULTY fault (Code 1214).
Troubleshooting for Main Reservoir Pressure Sensor Faulty fault (Code 1215).
Troubleshooting for Lube Oil Temperature Sensor Faulty fault (Code 1216).
Troubleshooting for Air Temperature Sensor Faulty fault (Code 1227).
Troubleshooting for WRONG Engine RPM at Notch 2 fault (Code 1229).
Troubleshooting for WRONG Engine RPM at Notch 3 fault (Code 1230).
Troubleshooting for WRONG Engine RPM at Notch 4 fault (Code 1231).
Troubleshooting for WRONG Engine RPM at Notch 5 fault (Code 1232).
Troubleshooting for WRONG Engine RPM at Notch 6 fault (Code 1233).
Troubleshooting for WRONG Engine RPM at Notch 7 fault (Code 1234).
Troubleshooting for WRONG Engine RPM at Notch 8 fault (Code 1235).
Troubleshooting for Traction Motor 1 High Current to be Confirmed fault (Code 1236).
Troubleshooting for Traction Motor 2 High Current to be Confirmed fault (Code 1237).
Troubleshooting for Traction Motor 3 High Current to be Confirmed fault (Code 1238).
Troubleshooting for Traction Motor 4 High Current to be Confirmed fault (Code 1239).
Troubleshooting for Traction Motor 5 High Current to be Confirmed fault (Code 1240).
Troubleshooting for Traction Motor 6 High Current to be Confirmed fault (Code 1241).
Troubleshooting for Speed sensor 1 faulty fault (Code 1242).
Troubleshooting for Speed sensor 2 faulty fault (Code 1243).
Troubleshooting for Speed sensor 3 faulty fault (Code 1244).
Troubleshooting for Speed sensor 4 faulty fault (Code 1245).
Troubleshooting for Speed sensor 5 faulty fault (Code 1246).
Troubleshooting for Speed sensor 6 faulty fault (Code 1247).
Troubleshooting for Altitude Sensor Faulty fault (Code 1254).
Troubleshooting for Brake Pipe Pressure Sensor Faulty fault (Code 1260).
Troubleshooting for Brake Cylinder Pressure Sensor Faulty fault (Code 1261).
Troubleshooting for Lube Oil Pressure Sensor Faulty fault (Code 1262).
Troubleshooting for Booster Air Pressure Sensor Faulty fault (Code 1263).
Troubleshooting for Fuel Oil Pressure Sensor Faulty fault (Code 1264).
Troubleshooting for P1 Stuck Closed in Auto Test fault (Code 2500).
Troubleshooting for P2 Stuck Closed in Auto Test fault (Code 2503).
Troubleshooting for S1 Stuck Closed in Auto Test fault (Code 2506).
Troubleshooting for GF Stuck Closed in Auto Test fault (Code 2513).
Troubleshooting for R1 Stuck Closed in Auto Test fault (Code 2516).
Troubleshooting for R2 Stuck Closed in Auto Test fault (Code 2517).
Troubleshooting for GF2 Stuck Closed in Auto Test fault (Code 2518).
Troubleshooting for AGPR Stuck Closed in Auto Test fault (Code 2519).
Troubleshooting for P1 Stuck Open in Auto Test fault (Code 2532).
Troubleshooting for P2 Stuck Open in Auto Test fault (Code 2533).
Troubleshooting for P31 Stuck Open in Auto Test fault (Code 2534).
Troubleshooting for P2 Stuck Open in Auto Test fault (Code 2535).
Troubleshooting for P22 Stuck Open in Auto Test fault (Code 2536).
Troubleshooting for P32 Stuck Open in Auto Test fault (Code 2537).
Troubleshooting for S1 Stuck Open in Auto Test fault (Code 2538).
Troubleshooting for S21 Stuck Open in Auto Test fault (Code 2539).
Troubleshooting for S31 Stuck Open in Auto Test fault (Code 2540).
Troubleshooting for GF Stuck Open in Auto Test fault (Code 2545).
Troubleshooting for EXPR Stuck Open in Auto Test fault (Code 2547).
Troubleshooting for R1 Stuck Open in Auto Test fault (Code 2548).
Troubleshooting for R2 Stuck Open in Auto Test fault (Code 2549).
Troubleshooting for Excess Traction Motor 1 Current fault (Code 1118).
Troubleshooting for Excess Traction Motor 2 Current fault (Code 1119).
Troubleshooting for Excess Traction Motor 3 Current fault (Code 1120).
Troubleshooting for Excess Traction Motor 4 Current fault (Code 1121).
Troubleshooting for Excess Traction Motor 5 Current fault (Code 1122).
Troubleshooting for Excess Traction Motor 6 Current fault (Code 1123).
Troubleshooting for S1 stuck open fault (Code 1124), related to contactor and wiring.
Troubleshooting for S21 stuck open fault (Code 1125), checking contactor, wiring, and card.
Troubleshooting for S31 stuck open fault (Code 1126), involving contactor, wiring, and card.
Troubleshooting for P1 stuck open fault (Code 1127), related to contactor operation and wiring.
Troubleshooting for P21 stuck open fault (Code 1128), checking contactor, wiring, and card.
Troubleshooting for P31 stuck open fault (Code 1129), involving contactor, wiring, and card.
Troubleshooting for P32 stuck open fault (Code 1130), checking contactor, wiring, and card.
Troubleshooting for EXPR circuit open fault (Code 1133), checking relay, wiring, and output card.
Troubleshooting for AGPR circuit open fault (Code 1134), checking relay, wiring, and input card.
Troubleshooting for Wrong Command fault (Code 1135), related to train line signals.
Troubleshooting for BKT Stuck in Motoring fault (Code 1136), checking air pressure and magnet valves.
Troubleshooting for BKT-B Aux Contact Open fault (Code 1137), focusing on auxiliary contacts and wiring.
Troubleshooting for Direction reversal attempted at High Speed fault (Code 1138).
Troubleshooting for Invalid Notch Command fault (Code 1139), related to train line signals.
Troubleshooting for Cranking Contactor Stuck Open fault (Code 1140), checking contactors and wiring.
Troubleshooting for Aux. Gen. Output Voltage High fault (Code 1141), checking voltage sensor and cards.
Troubleshooting for Battery Charging Current High fault (Code 1142), checking battery and charging current.
Troubleshooting for Aux. Gen. Output Over current fault (Code 1143), checking current sensors and cards.
Troubleshooting for Aux. Gen. Field Over Current fault (Code 1144), checking voltage sensor and wiring.
Troubleshooting for Auxiliary Generator Output Circuit Open fault (Code 1145).
Troubleshooting for Aux. Gen. Field Circuit Open or Short fault (Code 1146).
Troubleshooting for VCD Circuit Open fault (Code 1150), checking relay, wiring, and cards.
Troubleshooting for VCD Applied Penalty Brake fault (Code 1153), involving master controller and brake release.
Troubleshooting for MCU EEPROM Faulty fault (Code 1154).
Troubleshooting for VCD Stuck Closed fault (Code 1155), related to controller operation.
Troubleshooting for DEB Engine Breaker Off fault (Code 1156), checking breaker and wiring.
Troubleshooting for DEB Car body Breaker Off fault (Code 1157), checking breaker and wiring.
Troubleshooting for BKT Contact Open fault (Code 1165) during Dynamic Braking.
Troubleshooting for BKT Contact Open fault (Code 1166) during Dynamic Braking.
Troubleshooting for BKT Contact Open fault (Code 1167) during Dynamic Braking.
Troubleshooting for BKT Contact Open fault (Code 1169) during Dynamic Braking.
Troubleshooting for BKT Contact Open fault (Code 1170) during Dynamic Braking.
Troubleshooting for Alternator Voltage Sensor Faulty fault (Code 1173).
Troubleshooting for EP Analogue DB Power Supply FAULTY fault (Code 1174).
Troubleshooting for Alternator Field Current Sensor Faulty fault (Code 1175).
Troubleshooting for Exciter Field Current Sensor Faulty fault (Code 1176).
Troubleshooting for Traction Alternator Current Sensor Faulty fault (Code 1183).
Troubleshooting for Frequency DB Power Supply FAULTY fault (Code 1184).
Troubleshooting for WS EEPROM Faulty fault (Code 1185).
Troubleshooting for WS EEPROM Write Error at Power Off fault (Code 1186).
Troubleshooting for Traction motor 1 current sensor faulty fault (Code 1189).
Troubleshooting for Traction motor 2 current sensor faulty fault (Code 1190).
Troubleshooting for Traction motor 3 current sensor faulty fault (Code 1191).
Troubleshooting for Traction motor 4 current sensor faulty fault (Code 1192).
Troubleshooting for Traction motor 5 current sensor faulty fault (Code 1193).
Troubleshooting for Traction motor 6 current sensor faulty fault (Code 1194).
Troubleshooting for S1 Auxiliary Contact Stuck Open fault (Code 1195).
Troubleshooting for S21 Auxiliary Contact Stuck Open fault (Code 1196).
Troubleshooting for S31 Auxiliary Contact Stuck Open fault (Code 1197).
Troubleshooting for P1 Auxiliary Contact Stuck Open fault (Code 1198).
Troubleshooting for P21 Auxiliary Contact Stuck Open fault (Code 1199).
Troubleshooting for P2 Auxiliary Contact Stuck Open fault (Code 1200).
Troubleshooting for P21 Auxiliary Contact Stuck Open fault (Code 1201).
Troubleshooting for P22 Auxiliary Contact Stuck Open fault (Code 1202).
Troubleshooting for P32 Auxiliary Contact Stuck Open fault (Code 1203).
Troubleshooting for EXPR Stuck Closed fault (Code 1204), checking relay and output card.
Troubleshooting for AGPR Stuck Closed fault (Code 1205), checking relay, wiring, and input card.
Troubleshooting for GF Stuck Closed fault (Code 1206), checking contactor, wiring, and output cards.
Troubleshooting for Engine Shut Down due to OST Tripping fault (Code 1210).
Troubleshooting for GF Auxiliary Contact 1 OPEN FAULT (Code 1208).
Troubleshooting for GF Auxiliary Contact 2 OPEN FAULT (Code 1209).
Troubleshooting for Communication with Electronic Governor Faulty fault (Code 1211).
Troubleshooting for AUX EEPROM Faulty fault (Code 1212).
Troubleshooting for RTC Fault Occurred @ Power ON fault (Code 1213).
Troubleshooting for Aux. Analogue DB Power Supply FAULTY fault (Code 1214).
Troubleshooting for Main Reservoir Pressure Sensor Faulty fault (Code 1215).
Troubleshooting for Lube Oil Temperature Sensor Faulty fault (Code 1216).
Troubleshooting for Air Temperature Sensor Faulty fault (Code 1227).
Troubleshooting for WRONG Engine RPM at Notch 2 fault (Code 1229).
Troubleshooting for WRONG Engine RPM at Notch 3 fault (Code 1230).
Troubleshooting for WRONG Engine RPM at Notch 4 fault (Code 1231).
Troubleshooting for WRONG Engine RPM at Notch 5 fault (Code 1232).
Troubleshooting for WRONG Engine RPM at Notch 6 fault (Code 1233).
Troubleshooting for WRONG Engine RPM at Notch 7 fault (Code 1234).
Troubleshooting for WRONG Engine RPM at Notch 8 fault (Code 1235).
Troubleshooting for Traction Motor 1 High Current to be Confirmed fault (Code 1236).
Troubleshooting for Traction Motor 2 High Current to be Confirmed fault (Code 1237).
Troubleshooting for Traction Motor 3 High Current to be Confirmed fault (Code 1238).
Troubleshooting for Traction Motor 4 High Current to be Confirmed fault (Code 1239).
Troubleshooting for Traction Motor 5 High Current to be Confirmed fault (Code 1240).
Troubleshooting for Traction Motor 6 High Current to be Confirmed fault (Code 1241).
Troubleshooting for Speed sensor 1 faulty fault (Code 1242).
Troubleshooting for Speed sensor 2 faulty fault (Code 1243).
Troubleshooting for Speed sensor 3 faulty fault (Code 1244).
Troubleshooting for Speed sensor 4 faulty fault (Code 1245).
Troubleshooting for Speed sensor 5 faulty fault (Code 1246).
Troubleshooting for Speed sensor 6 faulty fault (Code 1247).
Troubleshooting for Altitude Sensor Faulty fault (Code 1254).
Troubleshooting for Brake Pipe Pressure Sensor Faulty fault (Code 1260).
Troubleshooting for Brake Cylinder Pressure Sensor Faulty fault (Code 1261).
Troubleshooting for Lube Oil Pressure Sensor Faulty fault (Code 1262).
Troubleshooting for Booster Air Pressure Sensor Faulty fault (Code 1263).
Troubleshooting for Fuel Oil Pressure Sensor Faulty fault (Code 1264).
Troubleshooting for P1 Stuck Closed in Auto Test fault (Code 2500).
Troubleshooting for P2 Stuck Closed in Auto Test fault (Code 2503).
Troubleshooting for S1 Stuck Closed in Auto Test fault (Code 2506).
Troubleshooting for GF Stuck Closed in Auto Test fault (Code 2513).
Troubleshooting for R1 Stuck Closed in Auto Test fault (Code 2516).
Troubleshooting for R2 Stuck Closed in Auto Test fault (Code 2517).
Troubleshooting for GF2 Stuck Closed in Auto Test fault (Code 2518).
Troubleshooting for AGPR Stuck Closed in Auto Test fault (Code 2519).
Troubleshooting for P1 Stuck Open in Auto Test fault (Code 2532).
Troubleshooting for P2 Stuck Open in Auto Test fault (Code 2533).
Troubleshooting for P31 Stuck Open in Auto Test fault (Code 2534).
Troubleshooting for P2 Stuck Open in Auto Test fault (Code 2535).
Troubleshooting for P22 Stuck Open in Auto Test fault (Code 2536).
Troubleshooting for P32 Stuck Open in Auto Test fault (Code 2537).
Troubleshooting for S1 Stuck Open in Auto Test fault (Code 2538).
Troubleshooting for S21 Stuck Open in Auto Test fault (Code 2539).
Troubleshooting for S31 Stuck Open in Auto Test fault (Code 2540).
Troubleshooting for GF Stuck Open in Auto Test fault (Code 2545).
Troubleshooting for EXPR Stuck Open in Auto Test fault (Code 2547).
Troubleshooting for R1 Stuck Open in Auto Test fault (Code 2548).
Troubleshooting for R2 Stuck Open in Auto Test fault (Code 2549).
Troubleshooting for Alternator Voltage Sensor Faulty fault (Code 1173).
Troubleshooting for EP Analogue DB Power Supply FAULTY fault (Code 1174).
Troubleshooting for Alternator Field Current Sensor Faulty fault (Code 1175).
Troubleshooting for Exciter Field Current Sensor Faulty fault (Code 1176).
Troubleshooting for Traction Alternator Current Sensor Faulty fault (Code 1183).
Troubleshooting for Frequency DB Power Supply FAULTY fault (Code 1184).
Troubleshooting for WS EEPROM Faulty fault (Code 1185).
Troubleshooting for WS EEPROM Write Error at Power Off fault (Code 1186).
Troubleshooting for Traction motor 1 current sensor faulty fault (Code 1189).
Troubleshooting for Traction motor 2 current sensor faulty fault (Code 1190).
Troubleshooting for Traction motor 3 current sensor faulty fault (Code 1191).
Troubleshooting for Traction motor 4 current sensor faulty fault (Code 1192).
Troubleshooting for Traction motor 5 current sensor faulty fault (Code 1193).
Troubleshooting for Traction motor 6 current sensor faulty fault (Code 1194).
Troubleshooting for S1 Auxiliary Contact Stuck Open fault (Code 1195).
Troubleshooting for S21 Auxiliary Contact Stuck Open fault (Code 1196).
Troubleshooting for S31 Auxiliary Contact Stuck Open fault (Code 1197).
Troubleshooting for P1 Auxiliary Contact Stuck Open fault (Code 1198).
Troubleshooting for P21 Auxiliary Contact Stuck Open fault (Code 1199).
Troubleshooting for P2 Auxiliary Contact Stuck Open fault (Code 1200).
Troubleshooting for P21 Auxiliary Contact Stuck Open fault (Code 1201).
Troubleshooting for P22 Auxiliary Contact Stuck Open fault (Code 1202).
Troubleshooting for P32 Auxiliary Contact Stuck Open fault (Code 1203).
Troubleshooting for EXPR Stuck Closed fault (Code 1204), checking relay and output card.
Troubleshooting for AGPR Stuck Closed fault (Code 1205), checking relay, wiring, and input card.
Troubleshooting for GF Stuck Closed fault (Code 1206), checking contactor, wiring, and output cards.
Troubleshooting for Engine Shut Down due to OST Tripping fault (Code 1210).
Troubleshooting for GF Auxiliary Contact 1 OPEN FAULT (Code 1208).
Troubleshooting for GF Auxiliary Contact 2 OPEN FAULT (Code 1209).
Troubleshooting for Communication with Electronic Governor Faulty fault (Code 1211).
Troubleshooting for AUX EEPROM Faulty fault (Code 1212).
Troubleshooting for RTC Fault Occurred @ Power ON fault (Code 1213).
Troubleshooting for Aux. Analogue DB Power Supply FAULTY fault (Code 1214).
Troubleshooting for Main Reservoir Pressure Sensor Faulty fault (Code 1215).
Troubleshooting for Lube Oil Temperature Sensor Faulty fault (Code 1216).
Troubleshooting for Air Temperature Sensor Faulty fault (Code 1227).
Troubleshooting for WRONG Engine RPM at Notch 2 fault (Code 1229).
Troubleshooting for WRONG Engine RPM at Notch 3 fault (Code 1230).
Troubleshooting for WRONG Engine RPM at Notch 4 fault (Code 1231).
Troubleshooting for WRONG Engine RPM at Notch 5 fault (Code 1232).
Troubleshooting for WRONG Engine RPM at Notch 6 fault (Code 1233).
Troubleshooting for WRONG Engine RPM at Notch 7 fault (Code 1234).
Troubleshooting for WRONG Engine RPM at Notch 8 fault (Code 1235).
Troubleshooting for Traction Motor 1 High Current to be Confirmed fault (Code 1236).
Troubleshooting for Traction Motor 2 High Current to be Confirmed fault (Code 1237).
Troubleshooting for Traction Motor 3 High Current to be Confirmed fault (Code 1238).
Troubleshooting for Traction Motor 4 High Current to be Confirmed fault (Code 1239).
Troubleshooting for Traction Motor 5 High Current to be Confirmed fault (Code 1240).
Troubleshooting for Traction Motor 6 High Current to be Confirmed fault (Code 1241).
Troubleshooting for Speed sensor 1 faulty fault (Code 1242).
Troubleshooting for Speed sensor 2 faulty fault (Code 1243).
Troubleshooting for Speed sensor 3 faulty fault (Code 1244).
Troubleshooting for Speed sensor 4 faulty fault (Code 1245).
Troubleshooting for Speed sensor 5 faulty fault (Code 1246).
Troubleshooting for Speed sensor 6 faulty fault (Code 1247).
Troubleshooting for Altitude Sensor Faulty fault (Code 1254).
Troubleshooting for Brake Pipe Pressure Sensor Faulty fault (Code 1260).
Troubleshooting for Brake Cylinder Pressure Sensor Faulty fault (Code 1261).
Troubleshooting for Lube Oil Pressure Sensor Faulty fault (Code 1262).
Troubleshooting for Booster Air Pressure Sensor Faulty fault (Code 1263).
Troubleshooting for Fuel Oil Pressure Sensor Faulty fault (Code 1264).
Error log message for P1 Stuck Closed in Auto Test (Code 2500).
Error log message for P2 Stuck Closed in Auto Test (Code 2503).
Error log message for S1 Stuck Closed in Auto Test (Code 2506).
Error log message for GF Stuck Closed in Auto Test (Code 2513).
Error log message for R1 Stuck Closed in Auto Test (Code 2516).
Error log message for R2 Stuck Closed in Auto Test (Code 2517).
Error log message for GF2 Stuck Closed in Auto Test (Code 2518).
Error log message for AGPR Stuck Closed in Auto Test (Code 2519).
Error log message for P1 Stuck Open in Auto Test (Code 2532).
Error log message for P2 Stuck Open in Auto Test (Code 2533).
Error log message for P31 Stuck Open in Auto Test (Code 2534).
Error log message for P2 Stuck Open in Auto Test (Code 2535).
Error log message for P22 Stuck Open in Auto Test (Code 2536).
Error log message for P32 Stuck Open in Auto Test (Code 2537).
Error log message for S1 Stuck Open in Auto Test (Code 2538).
Error log message for S21 Stuck Open in Auto Test (Code 2539).
Error log message for S31 Stuck Open in Auto Test (Code 2540).
Error log message for GF Stuck Open in Auto Test (Code 2545).
Error log message for EXPR Stuck Open in Auto Test (Code 2547).
Error log message for R1 Stuck Open in Auto Test (Code 2548).
Error log message for R2 Stuck Open in Auto Test (Code 2549).