MediaSonic HW210AX - Disc Playback Operations; Basic Playback Controls; On-Screen Display (OSD)

Notes
Playing a disc
NOTE: for composite only
Basic playback controls
• Press the PLAY/PAUSE
button to play or pause the disc.
• Press the PREV button to skip backward to the previous title/chapter.
• Press the NEXT button to skip forward to the next title/chapter.
• Press the REV button to fast reverse the disc 2x, 4x, 8x, 20x or back to
normal playback speed.
• Press the FWD button to fast forward the disc 2x, 4x, 8x, 20x or back
to normal playback speed.
• Press the STOP button ONCE to stop the disc playing; press the
PLAY/PAUSE button to resume playback from the last played location.
• Press the STOP button TWICE to stop playback completely.
Once a disc is loaded, the player will start playing automatically.
• If the disc is a DVD, the player will show the DVD menu or title menu.
• If the disc is a VCD 2.0, the player will activate PBC playback control
status.
• If the disc is a CD, the player will start playing the CD in sequence.
If the screen is black/white or scrolling up and down, press N/P on
remote to toggle between NTSC and PAL.
Unless otherwise indicated, use remote control to operate the features
described throughout this manual.
5
On-screen display (OSD)
• In DVD playback: press OSD on the remote control to display single
elapsed time, single remaining time, total elapsed time, total remaining
time and other information about the disc.
• In VCD playback: press OSD on the remote control to display single
elapsed time, single remaining time, display off and other information
about the disc.