6
PRODUCT CARE
STORAGE
When not in use, place the product into the box and store in a dry,
ventilated, cool area.
Do not twist the power cord.
Do not place product in direct sunlight or heat. Do not store where there is
high humidity, in areas such as bathrooms.
CLEANING
Before cleaning, make sure to turn the power off and unplug the power cord.
Use a dry cloth to clean the surface of the product.
Do not use corrosive cleaning agents to clean the product.
TROUBLESHOOTING
If you have problems when using this product, refer to the following tips and
possible solutions.
Status Possible Cause Solution
Product
doesn’t
turn on
Not powered Make sure power cord is
plugged in
Product
suddenly
stops
operating
1. Power failure
2. Timer exceeded 30 minutes
3. Continuous use time is too
long, overheat protection
4. Max User Weight exerted
on pedals has been
exceeded. A Protection
Action is initiated
1. Check that the power cord
is connected
2. Press the Power button to
turn the machine on
3. Let the product cool down,
then turn the power back on
4. Do not stand on device and
do not exceed the Max User
Weight
To Next Page
Loading...