5
DISPLAY ON CONTROL PANEL
PRESS POWER BUTTON TO TURN THE ELECTRONIC STEPPER OFF.
The device automatically stops operating after 30 minutes. Press Auto
Exercise or Manual Exercise to restart the timer at 30 minutes and continue
exercising.
WHEN POWER IS OFF OR NOT PLUGGED IN
You can use the device when it is not plugged in or when the power is off.
You can pedal forward or backwards.
MOVING THE PRODUCT
Always use the built-in handle to carry or move the device.
Scan Press the MODE button until the word SCAN appears on the
screen; the screen will automatically explore the value of each
function every five seconds.
Time Press the MODE button until the TIME Light appears on
the screen; the screen will show the actual length of time
of training/in use. (Minute. Second) Max Working Time:30
Minutes.
Distance Press the MODE button until the Distance Light appears on the
screen; the screen will show the Walking Distance (Meter).
Speed Press the MODE button until the Speed Light appears on the
screen; the screen will show the Current speed.
Counter Press the MODE button – when “Counter” is lit, the number
displayed on the control panel will indicate the number of
circles counted.
Calorie Press the MODE button – when “Calorie” is lit, the number
displayed on the control panel will indicate the number of
calories burned.
To Next Page
Loading...