POWER METER
8
Frequently Asked
Questions
Question: When I swing, I’m
not getting any readings. What
could cause this?
Answer: The first thing to check
is that the unit is on and in the
‘Ready” mode. If the screen is
blank, press the left button to
“awaken” the unit. Note that the
unit will enter “Standby” mode
after 40 seconds if there is no
swing, and that any swing less
than 20 mph will not register.
Question: The meter is on, but
when I swing, the numbers are
either way off, or there is no
change to the readings.
Answer: Make sure you have
the PowerMeter™ oriented
correctly, with the end labeled
“grip” closest to the edge of your
grip. Having this reversed will
cause the unit to not work
properly.
To Next Page
Loading...