88 of 208
Move to the next field with the button. Press the
/ buttons again to set the seconds for the desired
time interval.
Confirm your selection by pressing the OK button. Then
press the MENU button to close this submenu.
If you do not want to use the time-lapse function, set
the function to OFF. The shutter release on the camera
will now be triggered when the motion sensor registers
movement.
NOTICE!
If the time-lapse function has been
activated, the camera will take photos
at set time intervals irrespective of the
motion sensor.
8.12. Language
Here you can set the menu language.
8.13. Time & date
Set the time & date, time format and date format here.
8.14. Photo stamp
Set here whether a time stamp should appear on your
photos/videos.
The available settings are: Time & Date, Date, Off.
To Next Page