To Next PageTo Next PageHow to fix Medion X15507 when there is no picture and no sound?
If your Medion HDTV has no picture or sound, ensure the power cable is properly inserted into the socket. Also, verify that the signal reception is set to TV and that the power switch on the bottom of the device is turned on.
Why is my Medion X15507 remote control not working?
If the remote control for your Medion HDTV isn't working, first check the batteries to make sure they are functional and inserted correctly. Ensure that the sensor field is not exposed to strong light. If it still doesn't work, try turning the device off and on again using the power switch located on the bottom.
How to restore sound on Medion HDTV?
If your Medion HDTV has no sound, make sure the volume isn't set to the minimum level. Also, check that the mute setting is not active by pressing the button with the crossed-out loudspeaker symbol on the remote control.
Why is the picture on my Medion HDTV not clear?
If the picture on your Medion HDTV is not clear, the reception might be poor. Check if the antenna is connected properly.
How to adjust brightness on Medion HDTV?
If your Medion HDTV picture is too bright or too dark, check the contrast and brightness settings to adjust them accordingly.
Why does my Medion HDTV have stripes on the screen?
If your Medion HDTV displays stripes on the screen or the colors are faded, it could be due to interference from another device. Transmission antennae on radio stations, ham radios, and portable phones can also cause interference. Try operating the device as far away as possible from the device that might be causing the interference.
How to improve picture sharpness on Medion X15507 HDTV?
If your Medion HDTV picture is not sharp, first check if the antenna is connected properly, as poor reception can cause this issue. If the antenna is fine, check the sharpness and noise reduction settings in the BILD menu and adjust them as needed.
Why is my Medion X15507 HDTV showing a double picture?
If your Medion HDTV shows a double or triple picture, check if the antenna is aligned properly. The issue might also be due to waves reflecting off buildings or mountains.
What to do if there is no AV picture on Medion X15507 HDTV?
If your Medion HDTV has no AV picture, ensure that the contrast and brightness settings are correct. Also, ensure that all external devices have been connected properly and that you have selected the correct AV source. Any input source that you want to select with MODE or SOURCE must be marked in the SOURCES menu.
Why is the picture on my Medion X15507 pixellated?
If your Medion HDTV picture is pixellated, it might be due to interference from cars, trains, power lines, or neon lights. Also, there might be interference between the antenna and power cables, so try positioning the cables further apart.
General| Display Technology | LED |
|---|---|
| Screen Size | 55 inches |
| Resolution | 3840 x 2160 (4K UHD) |
| HDR Support | Yes |
| Smart TV | Yes |
| Operating System | Android TV |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Built-in Wi-Fi | Yes |
| Refresh Rate | 60 Hz |
| HDR | HDR10, HLG |
| Bluetooth | Yes |
Advises on safe operation, supervision, and handling by users, including children.
Details risks from packaging materials and electric shock, emphasizing caution.
Warns about ventilation, covering openings, and potential fire hazards.
Advises on handling a damaged screen and shattered pieces with protective measures.
Guides on choosing a suitable location, avoiding moisture, heat, and liquids.
Advises on keeping flames away and ensuring proper ventilation for safety.
Warns about TV stability, secure mounting, and risks of tipping.
Specifies operating/storage temperatures and avoiding interference sources.
Details safe connection to mains, earthing, and cable handling.
Provides guidelines for safe battery use, charging, and disposal to prevent damage.
Warns about battery hazards like leakage, heat, ignition, and explosion.
Guides on careful unpacking and handling small parts, with suffocation warnings.
Instructions for attaching the TV stand securely to the device.
Instructions for inserting batteries into the remote control.
Steps for connecting the antenna and power supply to the television.
How to turn the TV on, switch to standby, and turn off.
Explains AV, HDMI, ARC, and CEC connections for audio/video interfacing.
Guides through initial setup including language and country selection.
Explains how to set up reception types for channel scanning.
Details on setting frequency for digital cable channel scans.
Ways to change channels using remote or device buttons.
Adjusting volume and selecting audio languages.
Choosing between TV, AV, HDMI, VGA, and Wireless Display inputs.
Setting visual modes like Natural, Cinema, Sports, Dynamic.
Adjusting Contrast, Brightness, Sharpness, and Colour.
Setting volume, equalizer presets, and balance.
Selecting stereo, dual language, and digital audio output.
Selecting wireless/wired, WPS, and advanced network settings.
Details for speed tests, IP/DNS, and Wake-On functionality.
Scanning for available TV channels automatically.
Solutions for no picture, no sound, or poor reception.
Troubleshooting remote control, mode button, and auto power off.
Fixing wireless display connection and remote control problems.
