EasyManua.ls Logo

MEDIPIA Endoclean 2000 - Installation and Preparation; Preparation Before Use; How to Installation

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. PREPARATION BEFORE USE
Exchange period of disinfection should be indicated write on the product.
♧ Suitable amount of disinfection is 12. If the amount is over or low the suitable
level this product may not operate properly. <Period of used time: indicated
write on the bottle of disinfection solution>
-17-
5. HOW TO INSTALLATION
! Installation should be an additional trained personnel.
♧ The “endoscope fixing arm” must be installed toward the left and right wall and avoid aisle.
! Connect WATER connector in the back of cleaner to a tap with water connector
(Do not connect over 3m from the Top)
♧ In connecting water connector should be careful of water connector, leakage connector.
! Connect DRAIN connector in the back of cleaner to a drain with drain connector
(Do not connect over 3m from the drainage)
! Connect power cord to power supplier.
♧ Check whether supplied power is 220V AC

Related product manuals