Medisana PM 100 User Manual

Contents [ hide
1 ASSIGNED PURPOSE
2 SAFETY INFORMATION
3 SAFETY NOTES FOR
BATTERIES
4 Troubleshooting
5 Technical specifications
6 Documents / Resources
6.1 References
6.2 Related Manuals / Resources
ASSIGNED PURPOSE
The Pulse Oximeter PM 100 is a portable non-invasive device intended for spot-checking of oxygen saturation of arterial hemoglobin (SpO2) and
pulse rate of adult and pediatric patients. It is not suitable for continuous monitoring.
Instruction manual Pulse Oximeter PM 100
IMPORTANT INFORMATION! RETAIN FOR FUTURE USE!
Read the instruction manual carefully before using this device, especially the safety instructions, and keep the instruction manual for future use. Should
you give this device to another person, it is vital that you also pass on these instructions for use.
Explanation of symbols
This instruction manual belongs to this device. It contains important information about Starting up and operation. Read the instruction
manual thoroughly. Non-observance of these instructions can result in serious injury or damage to the device.
WARNING
These warning notes must be observed to prevent any injury to the user.
CAUTION
These notes must be observed to prevent any damage to the device.
NOTE
These notes give you useful additional information on the installation or operation.
Protection Rating regarding foreign objects and drops of water
Classification: Type BF applied part
No SpO2 alarm
LOT number
Storage conditions
Serial number
Manufacturer
Date of manufacture

Medisana PM 100 Specifications

General

Built-in display	Yes
Stopwatch	-
Measuring type	Finger
Battery type	AAA
Number of batteries supported	2
Storage temperature (T-T)	-20 - 55 °C
Operating temperature (T-T)	5 - 40 °C
Product color	Silver, White

Weight and Dimensions

Depth	34 mm
Width	58 mm
Height	35 mm
Weight	53 g