Medit i700 - Quick Guide Manual

02842 | 35 Gaeunsa-gil, Seongbuk-gu, Seoul, Republic of Korea
www.medit.com
Quick Guide: i700 wireless Setup
Getting Started
Please charge the rechargeable batteries before using the i700 wireless.
* Blue LED is Blinking: Charging
* Blue LED is On: Fully charged
* Red LED is Blinking: Check the charging terminal
(Dirt/Insertion)
While the batteries are charging, the extension cable battery can be used as a power supply.
Depending on the environment and situation, users can choose either the wireless or wired setup option
of the scanner.
Below you can see the checklist of components required for each setup:
Wired Setup
Wireless Setup
1. PC that meets the system requirements
2. Power Cord
3. Medical Adapter for Battery Charger
4. Battery Charger
5. Extension Cable Battery
Standard Connection
PD Connection
1. PC that meets the
system requirements
2. Power Cord
3. Medical Adapter for
Wireless Hub
4. Wireless Hub
5. USB 3.0 Cable (C to A)
1. PC that meets the
system requirements
2. Wireless Hub
3. Power Delivery Cable
(C to C)
* Refer to the following content for the step-by-step setup instructions.