Need help?Do you have a question about the Medivance BD Arctic Sun 6000 and is the answer not in the manual?
Explains symbols used on the device and their meanings.
Informs about situations that could result in death or serious injury.
Informs about situations that could result in minor injury or damage.
Lists critical warnings for safe operation and patient care.
Lists important cautions for operating the device safely.
Lists potential adverse effects of temperature management.
Describes the Arctic Sun system's functionality and components.
Specifies patient populations and conditions for system use.
Details system parameters, environmental conditions, and dimensions.
Describes the main unit containing electronics and control panel.
Explains cables for connecting temperature probes.
Details the power cord requirements and types.
Steps for unpacking and connecting the device.
Procedures for starting the system and filling the reservoir.
Steps to ensure the system operates correctly before patient use.
Steps for preparing pads and connecting the system for therapy.
Guidelines for positioning the patient and device.
How to initiate a new or continue a previous patient therapy.
How to select the correct pad type for the therapy.
Overview of the main screen for starting therapies.
Information on patient temperature readings and status.
Information on water temperature, flow rate, and system status.
Visual representation of patient and water temperature trends.
Feature for temperature surveillance based on set thresholds.
Feature monitoring heat transfer during cooling/warming.
Configuration options for controlling patient temperature.
How to initiate and terminate therapy sessions.
Alternative mode for direct temperature management.
Steps to start normothermia therapy.
Steps to start hypothermia therapy (cooling/rewarming).
Setting the trigger for the cooling duration timer.
Setting how the rewarming process is initiated.
Feature to warm or cool water before therapy starts.
Setting the maximum allowable water temperature.
Setting the minimum allowable water temperature.
Setting the temperature threshold for a high patient alarm.
Setting the temperature threshold for a low patient alarm.
Selecting algorithms based on patient condition.
Selecting default display units (°C or °F).
Enabling or disabling the second temperature input.
How to retrieve therapy data from the system.
Configuring network connection for data transfer.
Information on system calibration requirements.
Procedure for draining water from the system.
Saving current configurations as new defaults.
Setting system time and date formats.
Critical alarms that stop therapy until resolved.
Alarms requiring operator response to prevent injury.
Alarms indicating minor issues or potential discomfort.
Guidance for resolving problems related to water temperature or flow.
Steps for addressing inaccurate or unstable patient temperatures.
How to lock or unlock the device screen.
Troubleshooting steps for lost Wi-Fi connectivity.
Procedures for cleaning external device surfaces.
Procedures for disinfecting external device surfaces.
Checks after cleaning before returning to service.
Checking integrity of cables and connectors.
Cleaning the chiller condenser for optimal cooling.
Periodic checks for damage or wear.
Process for adding cleaning solution to the reservoir.
Using system access to verify performance and pressures.
General| Brand | Medivance |
|---|---|
| Model | BD Arctic Sun 6000 |
| Category | Medical Equipment |
| Language | English |
To Next Page
