MEDIX Actineb User Manual

THE MEDIX Actineb
Technical Specifications
Operating Requirements
230v +/- 10%; 50Hz
Dimensions & Weight
282 x 200 x 125; 2.3 Kg
Particle Size
3.0 microns
% Particles < 5 um
75% *
Nebulisation Rate
0.3ml per minute*
Nominal Flow
7 L/min @ 1.00 bar
Type Rating
Class II BF. Intermittent (use for 60
mins; do not reuse within 60 mins).
CE 0120 Class IIa MDD 93/42/EEC
Noise
64.2db
* Using Microneb III

MEDIX Actineb Specifications

General

Brand	MEDIX
Model	Actineb
Category	Medical Equipment
Language	English

Summary

Technical Specifications

Operating Requirements

Details on voltage, frequency, and power requirements for operation.

Dimensions & Weight

Physical size and mass specifications of the nebuliser unit.

Particle Size

Information on the aerosol particle size distribution.

% Particles < 5 um

Percentage of aerosol particles smaller than 5 micrometers.

Nebulisation Rate

Specifies the rate at which medication is nebulised.

Nominal Flow

Indicates the standard air flow rate of the device.

Type Rating

Classification and operational rating of the equipment.

Noise

The sound pressure level emitted by the unit.

Operating Instructions

Introduction

Overview of the nebuliser system's purpose and intended use.

Mains AC Operation

Steps for connecting and operating the nebuliser from mains power supply.

Filling the Nebuliser Chamber

Administering the Medication

Safety Precautions

Technical Description

Notes on Nebuliser Care

Caution

Important warnings and precautions regarding nebuliser use.

Cleaning

Instructions for maintaining the cleanliness of the nebuliser and accessories.

Replacement

Guidance on timely replacement of disposable nebuliser components.

Storage

Recommendations for storing the nebuliser unit safely.

Symbols

Troubleshooting

Guarantee

Spares and Accessories

Servicing

Replacing the Inlet Filter Disc

Procedure for changing the inlet filter disc in the unit.