What to do if Medline EVENCARE G3 shows glucose test result is higher than 600 mg/dL?
If your Medline Blood Glucose Meter displays a glucose test result higher than 600 mg/dL, wash and dry your hands, then repeat the test using a new test strip on the patient’s fingertip. If the result remains “HI,” it is important to contact the patient’s physician or healthcare provider for further assistance.
What to do if Medline EVENCARE G3 shows glucose test result is lower than 20 mg/dL?
If your Medline Blood Glucose Meter shows a glucose test result lower than 20 mg/dL, wash and dry your hands, and then repeat the test on the patient’s fingertip with a new test strip. If the result is still “LO,” it is important to contact the patient’s physician or healthcare provider.
How to fix problems with Medline Blood Glucose Meter electronics?
If you encounter a problem with the Medline Blood Glucose Meter's electronics, try replacing the battery and turning the meter on again. This may resolve the issue.
What to do if Medline EVENCARE G3 Blood Glucose Meter shows temperature is out of range?
If the Medline Blood Glucose Meter displays an error related to temperature, move the meter to a location where the temperature is between 50°F and 104°F. Allow approximately 15 minutes for the meter to adjust to the new temperature before using it.
What to do if Medline EVENCARE G3 Blood Glucose Meter shows used test strip error?
If you get an error on your Medline Blood Glucose Meter while testing, it might be because you used a test strip that has already been used. To solve this, repeat the test using a new test strip.
What to do if the strip was removed from Medline EVENCARE G3 during testing?
If you removed the strip from the Medline Blood Glucose Meter during testing, you will need to repeat the test with a new test strip.
What to do if Medline Blood Glucose Meter says the size of the blood sample was too small?
If the Medline Blood Glucose Meter indicates that the blood sample size was too small, repeat the test using a new test strip to ensure accurate results.
Why Medline Blood Glucose Meter has no results stored?
If there are no results stored in your Medline Blood Glucose Meter, make sure that the date and time are set up correctly. This will help the meter store and display your readings accurately.
General| Brand | Medline |
|---|---|
| Model | EVENCARE G3 |
| Category | Blood Glucose Meter |
| Language | English |
To Next Page
