18
GENERAL USE INSTRUCTIONS
For models: MDS808210AR, MDS808210AB, MDS808210PC
To use Locking Hand Grip Brakes
Handle grip wheel lock in open /
unlocked position.
Squeeze brake to hold chair in
stopped position.
Handle grip wheel lock in closed /
locked position.
To Lock, squeeze handle and with
other hand push lock forward.
Release handle while holding lock
forward.
To Release, squeeze handle.
Installing / Removing the Swing-away Legrest / Footrest Riggings
To Install the Riggings:
1. Hold the legrest rigging to the side of the wheelchair.
2. Install the legrest assembly hinge plates onto the hinge pins of the wheelchair
frame.
3. Push the legrest rigging to the front until it locks securely into place.
To Next Page
Loading...
Need help?
General
