22
MAINTENANCE
SAFETY INSPECTION CHECKLIST
ITEM
INITIALLY
INSPECT
/ ADJUST
WEEKLY
INSPECT /
ADJUST
MONTHLY
INSPECT /
ADJUST
PERIODICALLY
GENERAL
Chair rolls straight.
(no excessive pull to one side)
X
X
CLEANING
Wipe chrome parts with clean, soft cloth.
Auto wax / similar product on metal parts.
Clean upholstery with mild soap solution.
Use only water on hand grips.
Dry chair immediately when wet.
X
X
X
FRAME & CROSS BRACES
Inspect for loose or missing hardware.
Inspect for bent frame or cross braces.
X
X
X
X
SEAT AND BACK UPHOLSTERY
Inspect for rips or sagging.
Inspect for loose or broken hardware.
X
X
X
X
RECLINER
Inspect reclining mechanism to ensure they
are clean and work freely.
Ensure stabilizer bar engages securely.
X
X
X
X
FRONT CASTERS AND REAR WHEELS
Inspect wheel / fork assembly for proper
tension by lifting the chair and spinning the
caster. It should come to a gradual stop.
Loosen locknut if wheel wobbles / tighten
locknut if wheel binds to a stop.
Ensure wheel bearings are clean and free of
moisture.
X
X
X
X
X
X
REAR WHEELS
No excessive side movement or binding
when chair is lifted and wheels are spun.
X
X
FRONT AND REAR TYRES
Inspect for flat spots and wear.
X
X
HAND GRIP WHEEL LOCKS
(If equipped) Test in both complete and
intermittent lock positions. Ensure the chair
does not move when the locks are engaged.
X
X
WHEEL LOCKS
Do not interfere with tires when rolling.
Pivot points free of wear and looseness.
Wheel locks are easy to engage.
X
X
X
X
X
X
SE
LAP BELT
Inspect for secure attachment.
Inspect for worn or frayed belt.
X
X
X
X
Take the wheelchair to a qualified dealer annually for a thorough inspection
and maintenance or repair services.
To Next Page
Loading...
Need help?
General
