17
GENERAL USE INSTRUCTIONS
For models: MDS808210AR, MDS808210AB, MDS808210PC
A. To Adjust the Wheel Lock Assembly to the wheel
4. Loosen the both bolts located on inside of Wheel Lock Assembly under seat.
5. Slide Wheel Lock Assembly to desired Height.
6. Tighten the both bolts located on inside of Wheel Lock Assembly under seat
B. To Adjust the Wheel Lock Assembly Cable to Handbrake
1. Loosen the cable retaining bolt
2. Pull cable to desired tightness
3. Tighten cable retaining bolt
To Next Page
Loading...
Need help?
General
