Press and hold the Multifunction button for about 5 seconds until you hear the headset say “Pairing”
and the light flashes red and blue. STEP 2: PAIRING (CONTINUED)
Open the Bluetooth menu on the device you wish to pair (usually located in Settings > Bluetooth). If
needed, select “search for devices”, “add new device”, or “refresh”.
STEP 2: PAIRING (CONTINUED)
Select “MEE audio X7” and allow pairing to complete. Use “0000” if a pin is required. Visit the
Bluetooth Support Page at MEEaudio.com/Bluetooth for additional Bluetooth pairing and setup
information.
STEP 3: SELECTING EARTIPS
To Next Page
Loading...
