Meec tools 008199 - Technical Data; Scope of Delivery; Product Description

EN
40
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched o and when it is idling,
in addition to the start-up time).
DESCRIPTION
SCOPE OF DELIVERY
• Screwdriver
• Charger
• Battery
• Storage case
• HSS drills
2.5/3/3/3.5/4/4/4/5/5/6/6/6/7/8
• Wood drills 3/4/5/6/7/8
• CRV bits T7/10/15/20/25/27/30/35/40
• 1 tri-wing bit
• CRV bits PH0/1/2/2/2/2/2/3, S0, S1
• CRV bits PZ0/1/2/2/2/2/2/3, S2, S3
• CRV bits slotted 3/4/4.5/5/6/6.5/7/8
• 2 square bits
• Tri-wing: 2
• CRV bits H2/2.5/2.7/3/3.5/4/2/2.5/3/4
• 1 x 55 mm bit holder
PRODUCT DESCRIPTION
1. Quick chuck
2. Torque setting
3. Gear selector
4. LED indicator for battery charging
5. Right/left drive selector
6. Handle
7. Release button for battery
8. Battery
9. Power switch with speed control
10. LED work light
11. Battery compartment
12. Quick charger
TECHNICAL DATA
Chuck 0.8 – 10 mm
Number of torque settings 19
Drilling modes 1
Drilling capacity Steel: 6 mm
Wood: 20 mm
Torque 20 Nm
Speed 0 – 350/ 0 – 1300 rpm
Operating voltage 12 V DC
Battery capacity 1.5 Ah
Sound pressure level, LpA 63 dB(A), K = 3 dB
Sound power level, LwA 74 dB(A), K = 3 dB
Drilling, ah,D* 1.580 m/s², K = 1.5 m/s²
Screwdriving, ah** 0.969 m/s², K = 1.5 m/s²
* In metal ** Without percussion
Charger
Operating voltage 230 V
~
50 Hz
Output voltage 12.8 V DC
Output current 2 A
Charging time 5 h
Safety class II
Always wear ear protection.
The declared values for vibration and noise,
which have been measured by a standardised
test method, can be used to compare dierent
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 60745-2-1:2010, EN 60745-2-2:2010.
WARNING!
The actual vibration and noise level when
using tools may dier from the specied
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual