Meec tools 009533 - Usage and Maintenance; Power Tool Operation; Battery and Charger Care; Service and Additional Safety

EN
28
USING AND LOOKING AFTER
POWER TOOLS
• Do not force the power tool. Use the
correct power tool for the planned work.
The tool does the job better and safer
when used at the rate for which it was
designed.
• Do not use the tool if it cannot be
switched on and o with the power
switch. Power tools that cannot be
controlled with the power switch are
dangerous and must be repaired.
• Pull out the plug and/or remove the
battery before making any adjustments,
changing accessories or putting the power
tool away. These safety precautions reduce
the risk of accidently starting the tool.
• Store power tools out of the reach of
children when not in use. Never allow
children, or anyone who is unfamiliar with
the power tool and these instructions, to
use the tool. Power tools are dangerous if
used by inexperienced persons.
• Keep the power tool properly maintained.
Check that moving parts are properly
adjusted and do not jam, and that no
parts are incorrectly tted or damaged.
Check for other factors that could aect
functionality. If the power tool is
damaged, it must be repaired before
being used again. Many accidents are
caused by poorly maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to jam
and are easier to control.
• Use the power tool, accessories etc., in
accordance with these instructions, taking
into account the actual working
conditions and the work that is to be
done. It can be dangerous to use power
tools for purposes other than those for
which they are intended to be used.
USING AND LOOKING AFTER
BATTERYPOWERED TOOLS
• The battery must only be charged with the
charger recommended by the
manufacturer. A charger intended for one
type of battery can result in a re risk if
used with another type of battery.
• Only use power tools with the specied
batteries. The use of other batteries can
cause accidents or a re.
• When the battery is not being used it
must be kept away from other metal
objects such as paper clips, coins, keys,
nails, screws and other metal objects that
can short circuit the terminals. Short
circuiting the battery terminals can cause
burns or a re.
• Failure to handle the battery carefully can
cause uid to leak from the battery. Avoid
contact with battery uid. Rinse well with
plenty of water if you come into contact
with battery uid. Seek medical attention
if you get battery uid in your eyes. Fluid
leaking from the battery can cause
irritation or burns.
SERVICE
The power tool must only be serviced by
qualied personnel using identical spare parts.
This will ensure that the power tool remains
safe to use.
ADDITIONAL SPECIAL SAFETY
INSTRUCTIONS
• Wear safety glasses.
• Wear safety gloves.
• Do not expose the product to rain or
moisture.
• Familiarise yourself with the controls on
the product and how to use them.
• Never allow children, or anyone who is
unfamiliar with the product and these
instructions, to use it.