Meec tools 011233 - TRANSPORT AND TROUBLESHOOTING; TRANSPORT; TROUBLESHOOTING

EN
47
TRANSPORT
• Remove the battery from lawn mower before transport.
• Undo the two quick-couplings and fold down the top handle.
• Use the carry handle to transport the lawn mower.
TROUBLESHOOTING
Problem Possible cause Action
The product does not
work.
The battery is at. Check the battery. Repairs must
be carried out by an authorised
electrician.
The safety catch is defective. Take the product to an authorised
service centre, or other qualied
personnel, to be checked and
repaired.
Defective motor. Take the product to an authorised
service centre, or other qualied
personnel, to be checked and
repaired.
The safety key is not inserted. Insert the safety key.
The motor stops when
in use.
The battery is at. Charge the battery.
The battery is mot correctly
inserted.
Insert the battery correctly.
The battery is defective. Clean the terminals, replace with a
new battery of the same type.
Reduced performance. The battery is at. Charge the battery.
The battery is not fully charged. Charge the battery.
The grass is too high. Cut in steps.
Heavy vibration. The blade is not properly tted. Check the blade.
The blade blocked by a foreign
object.
Unblock the blade.
The blade is damaged. Replace the blade.
Inadequate grass
catching.
The grass catcher is full. Empty the grass catcher.
The ejector opening is blocked. Clear the ejector opening.
The mowing height is set too low. Adjust to a suitable mowing height.
The lawn is mown
unevenly.
The blade is blunt. Sharpen or replace the blade.
The grass is too high. Cut in steps.