Meec tools 012274 - Special Safety Instructions; Percussion Drilling; Technical Data

EN
27
sure you understand the symbols and their
signicance.
Read the instructions.
Approved in accordance with
the relevant EU directives.
Recycle as electrical waste.
TECHNICAL DATA
Rated voltage 18 V DC
Torque 35 Nm
Torque settings 19 + drill setting
Speed 0 – 350/ 0 – 1200 rpm
Chuck 1 – 13 mm
Drilling capacity Steel: 10 mm
Wood: 20 mm
Sound pressure level, LpA 80.8 dB(A), K = 5 dB
Sound power level, LwA 91.8 dB(A), K = 5 dB
Drilling * 2.288 m/s², K = 1.5 m/s²
Percussion drilling ** 13.83 m/s², K = 1.5 m/s²
* Drilling in metal, Ah,D
** Percussion drilling in concrete, Ah,ID
Always wear ear protection.
The declared vibration value and noise, which
have been measured by a standardised test
method, can be used to compare dierent
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN62841-2-1:2018.
by an authorised service centre or other
qualied personnel. (For battery
operation only).
SPECIAL SAFETY INSTRUCTIONS
FOR SCREW DRIVING AND
PERCUSSION DRILLING
Hold the power tool by the insulated grips
when working in areas where it may come
into contact with concealed electrical cables
or its own power cord. Contact with a live
cable will cause the metal parts on the tool to
also become live and give the user an electric
shock.
REDUCTION OF NOISE AND
VIBRATIONS
• Plan the work so that exposure to heavy
vibrations is spread over a longer period.
• To reduce noise and vibrations when in
use, limit the time the tool is in use, and
use low-power/vibration mode and
suitable safety equipment.
• Take the following precautions to
minimise the risks of exposure to
vibrations and/or noise:
– Only use the tool in accordance with
these instructions.
– Check that the tool is in good
condition.
– Use accessories in good condition,
and which are suitable for the
purpose.
– Keep a rm grip on the handles/grips.
– Maintain and lubricate the tool in
accordance with these instructions.
Symbols
The following symbols can be of importance
for how you should use your power tool. Make