EN
81
USE
CONNECTION
1. Switch on the ignition.
2. Localise the 16-pin diagnostics connector (DLC) and connect
the fault code reader.
FUNCTIONAL DESCRIPTION
For BMW
Select For BMW and then For BMW Series Diagnose. The display
shows all the series as per the gure.
Oil Reset = Oil change reset
EPB Reset = Electronic Parking Brake Reset
BAT = Battery
BMS Reset = Battery Monitoring Sensor Reset
ETCS Reset = Electronic Throttle Control System Reset
FIG. 3
Example
Press For 5 Series and then press G38 2017–Present. The
following is shown on the display:
FIG. 4
To Next Page
Loading...
