EN
82
Basic functions
Press Basic Functions. The following display image is shown.
• Press System Scan to scan all vehicle systems.
• Press Manual Selection to show all supported systems and to
select a system for diagnosis.
FIG. 5
Press Manual Select, the following is shown on the display:
FIG. 6
Example
Select ECM Engine Control Module. The following is shown on the
display:
FIG. 7
Version information
Press Version Information. The following is shown on the display:
FIG. 8
Read fault codes
Press Read Fault Codes. Use the up and down arrows to check the
following fault codes:
FIG. 9
To Next Page
Loading...
