Meec tools 019327 - Page 85

EN
85
Battery management
Press Battery Management.. The following display image is
shown:
FIG. 17
1. Use the up or down arrows to select alternative 2 and press
OK to register battery change. The following display image
is shown.
FIG. 18
2. Use the up or down arrows to select alternative 1 and press
OK. The following display image is shown:
FIG. 19
Electronic Parking Brake (EPB)
1. Press EPB Electronic Parking Brake.
The following display image is shown:
FIG. 20
2. Select row 1 Workshop mode automatic hold brake or row 2
Start automatic hold brake.
Steering-angle sensor
Press Steering-angle sensor. The following display image is
shown:
FIG. 21
Information: Point the front wheels forward. The steering wheel
should be horizontal.