Why is there no sound from my Meelectronics Atlas?
If you are not getting any sound from your Meelectronics Headphone, ensure that the cable is fully plugged into both the headphones and the audio source. Also, verify that the audio is playing and the volume is at a suitable level. Make sure that the volume control is not set to the minimum; adjust the volume on both the device and the headset cable.
What to do if the person on the other end can’t hear me on Meelectronics Headphone during phone calls?
If the person you are calling can't hear you when using your Meelectronics Headphone, first ensure that the microphone/remote unit on the cable is closest to the headphones and that the microphone is positioned near your mouth. Try unplugging the headset cable and plugging it back into your phone. If you are using a computer, you may need an adapter to separate the microphone and audio signals.
Why is the audio quality poor on my Meelectronics Atlas Headphone?
If you are experiencing poor audio quality with your Meelectronics Headphone, check that the cable is fully plugged into both the headphones and the audio source. Inspect the audio jack of your device for any lint or debris, and wipe the headphone cable plug firmly with a clean cloth or paper towel. If using the headset cable with a computer, laptop, media player, or airplane, and the sound improves when you hold the mic button, the 4-pin headset plug may not be compatible.
General| Brand | Meelectronics |
|---|---|
| Model | Atlas |
| Category | Headphone |
| Language | English |
Details microphone location and optimal positioning for clear voice transmission.
Explains the '+' symbol for maximum volume and troubleshooting sound issues.
To Next Page
