• To insert a new battery pack, align the grooves on both ends of the
connector (board & battery pack).
• Insert, connect, and adjust the two ends of the connector together.
Make sure to tighten the connector to make a good seal.
• Ensure the connector lays flat within the accessory wire and the groove
of the board.
• Replace and tighten the bolts with the hex wrench, and put the grip tape
back on.
14
Replace the Battery Pack
15
More Information Online
This manual is a quick start guide intended for someone with little experience
in riding electric skateboards. If you want to learn more on how to start riding,
superior riding skills, and solutions for riding problems, please visit our website:
www.meepoboard.com or send us a mail to info@meepoboard.com.
GETTING STARTED
• How to stand on the board
• How to turn
• How to find a good spot to practice
ADVANCED TECHNIQUES
• How to footbrake
• How to ride uphill and downhill safely
• What to look for when riding through traffic
MAINTENANCE
• Pre-ride inspection
• Routine maintenance
To Next Page
Loading...
