Why is the beam dim on my Mega BEAM 200?
If the Mega Flood Light's beam appears dim, first ensure the optics are clean and the lens is in good condition, without cracks. If the issue persists, replace the lamp with a new one of the specified type and rating.
What to do if my Mega Flood Light only works intermittently?
If your Mega Flood Light only works intermittently, inspect the power supply and voltage to ensure they are normal. Also, verify that the fan is working correctly and that the fans and their filters are not blocked.
How to fix Mega BEAM 200 Flood Light when it doesn’t accept controller instructions?
If the Mega Flood Light doesn’t accept instructions from the controller, check the digital start address and the connection of the communication control line.
What to do if Mega Flood Light has defective projection?
If the Mega Flood Light has a defective projection, ensure the lamp is within its life limit and remove any dust or grease from the lenses.
How to fix Mega Flood Light when it doesn’t switch on?
If the Mega Flood Light doesn't switch on, check the fuse and the power socket. Also, replace the lamp.
General| IP Rating | IP65 |
|---|---|
| Housing Material | Aluminum |
| Power | 200W |
| Luminous Flux | 20000 lm |
| Lifespan | 50, 000 hours |
| Material | Aluminum |
Instructions for installing or replacing the projector lamp safely and correctly.
Details on connecting the projector using DMX protocol for control and communication.
Overview of menu operations and controlling functions via the LCD display panel.
Detailed breakdown of the main menu structure and sub-menus for operational settings.
Guidelines for cleaning the projector's lenses and filters to ensure optimal light output.
Detailed list of DMX channels, values, and their corresponding functions for color and strobe effects.
To Next Page