THE SOUS-VIDE COOKER| MC-1000 | 9
CHANGING TEMPERATURE UNITS
Press and hold the button until a letter appears on
the digital screen (F or C) to toggle between Fahrenheit
and Celsius temperature units.
CALIBRATING THE TEMPERATURE
The temperature sensor on the cooker is extremely
accurate and is calibrated at the factory. However,
if you want the readings on the cooker to match that
of your thermometer, perform the following steps to
recalibrate the cooker.
1. Determine the difference between the temperature
reading on the cooker and the temperature reading
on your thermometer. You can change the cooker’s
reading by up to ±49.8°F (9.9°C).
2. Press and hold the
button for about 5 seconds.
The display will show 0.0°
3. Using the scroll wheel, scroll up or down to add or
subtract up to 49.8°F (9.9°C).
SETUP
To Next Page
Loading...